MC10EP16 Datasheet, PDF (1/8 Pages) ON Semiconductor – Differential Receiver

MC10EP16
Differential Receiver
The MC10EP16 is a differential receiver. The device is functionally
equivalent to the EL16 and LVEL16 devices with higher performance
capabilities. With output transition times significantly faster than the
EL16 and LVEL16, the EP16 is ideally suited for interfacing with high
frequency sources.
The EP16 provides a VBB output for either single-ended use or as a
DC bias for AC coupling to the device within the package. The VBB
pin should be used only as a bias for the EP16 as its current sink/source
capability is limited. Whenever used, the VBB pin should be bypassed
to ground via a 0.01µf capacitor.
• 160ps Propagation Delay
• High Bandwidth to 3 GHz Typical
• PECL mode: 3.0V to 5.5V VCC with VEE = 0V
• ECL mode: 0V VCC with VEE = –3.0V to –5.5V
• Internal Input Resistors: Pulldown on D, Pulldown and Pullup on D
• Q Output will default LOW with inputs open or at VEE
• ESD Protection: 4KV HBM, 200V MM
• VBB Output
• New Differential Input Common Mode Range
• Moisture Sensitivity Level 1, Indefinite Time Out of Drypack.
For Additional Information, See Application Note AND8003/D
• Flammability Rating: UL–94 code V–0 @ 1/8”,
Oxygen Index 28 to 34
• Transistor Count: 167 devices
NC 1
D2
36.5k
75k
D3
75k
VBB 4
8 VCC
7Q
6Q
5 VEE
http://onsemi.com
8
1
SO–8
D SUFFIX
CASE 751
MARKING DIAGRAM
8
HEP16
ALYW
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
1
*For additional information, see Application Note
AND8002/D
PIN
D, D
Q, Q
VBB
PIN DESCRIPTION
FUNCTION
ECL Data Inputs
ECL Data Outputs
Ref. Voltage Output
ORDERING INFORMATION
Device
Package
Shipping
MC10EP16D
SOIC
98 Units/Rail
MC10EP16DR2 SOIC
2500 Tape & Reel
Figure 1. 8–Lead Pinout (Top View) and Logic Diagram
© Semiconductor Components Industries, LLC, 1999
1
September, 1999 – Rev. 1.0
Publication Order Number:
MC10EP16/D