MC10EP116 Datasheet, PDF (1/8 Pages) ON Semiconductor – Hex Differential Line Receiver

MC10EP116
Hex Differential Line
Receiver
The MC10EP116/100EP116 is a 6-bit differential line receiver
based on the EP16 device. The 3.0GHz bandwidth provided by the
high frequency outputs makes the device ideal for buffering of very
high speed oscillators.
A VBB pin is available to AC couple an input signal to the device.
More information on AC coupling can be found in the design
handbook interfacing with ECLinPS on our website.
The design incorporates two stages of gain, internal to the device,
making it an excellent choice for use in high bandwidth amplifier
applications.
The differential inputs have internal clamp structures which will
force the Q output of a gate in an open input condition to go to a LOW
state. Thus, inputs of unused gates can be left open and will not affect
the operation of the rest of the device. Note that the input clamp will
take affect only if both inputs fall 2.5V below VCC. All VCC and VEE
pins must be externally connected to power supply to guarantee proper
operation.
• 230ps Typical Propagation Delay
• High Bandwidth to 3.0 GHz Typical
• PECL mode: 3.0V to 5.5V VCC with VEE = 0V
• ECL mode: 0V VCC with VEE = –3.0V to –5.5V
• Internal Input Resistors: Pulldown on D, Pulldown and Pullup on D
• Q Output will default LOW with inputs open or at VEE
• ESD Protection: 2KV HBM, 100V MM
• VBB Output
• New Differential Input Common Mode Range
• Moisture Sensitivity Level 2
For Additional Information, See Application Note AND8003/D
• Flammability Rating: UL–94 code V–0 @ 1/8”,
Oxygen Index 28 to 34
• Transistor Count: 729 devices
LOGIC DIAGRAM
D0
Q0
D0
Q0
D1
Q1
D1
Q1
D2
Q2
D2
Q2
D3
Q3
D3
Q3
D4
Q4
D4
Q4
D5
Q5
D5
Q5
VBB
http://onsemi.com
32–LEAD TQFP
FA SUFFIX
CASE 873A
MARKING DIAGRAM*
MC10
EP116
AWLYYWW
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
32
1
*For additional information, see Application Note
AND8002/D
PIN DESCRIPTION
PIN
FUNCTION
D[0:5], D[0:5]
ECL Differential Data Inputs
Q[0:5], Q[0:5] ECL Differential Data Outputs
VBB
Reference Voltage Output
VCC
Positive Supply
VEE
Negative, 0 Supply
ORDERING INFORMATION
Device
Package
Shipping
MC10EP116FA
TQFP 250 Units/Tray
MC10EP116FAR2 TQFP 2000 Tape & Reel
© Semiconductor Components Industries, LLC, 2000
1
March, 2000 – Rev. 3
Publication Order Number:
MC10EP116/D