MC10EL51 Datasheet, PDF (1/3 Pages) ON Semiconductor – Differential Clock D Flip-Flop

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Differential Clock D FlipĆFlop
The MC10EL/100EL51 is a differential clock D flip-flop with reset. The
device is functionally similar to the E151 device with higher performance
capabilities. With propagation delays and output transition times
significantly faster than the E151 the EL51 is ideally suited for those
applications which require the ultimate in AC performance.
The reset input is an asynchronous, level triggered signal. Data enters
the master portion of the flip-flop when the clock is LOW and is
transferred to the slave, and thus the outputs, upon a positive transition of
the clock. The differential clock inputs of the EL51 allow the device to be
used as a negative edge triggered flip-flop.
The differential input employs clamp circuitry to maintain stability under
open input (pulled down to VEE) conditions.
• 475ps Propagation Delay
• 2.8GHz Toggle Frequency
• 75kΩ Internal Input Pulldown Resistors
• >1000V ESD Protection
LOGIC DIAGRAM AND PINOUT ASSIGNMENT
R1
D2
CLK 3
CLK 4
R
D
Flip-Flop
8 VCC
7Q
6Q
5 VEE
MC10EL51
MC100EL51
8
1
D SUFFIX
PLASTIC SOIC PACKAGE
CASE 751-05
TRUTH TABLE
D R CLK Q
LL Z
L
HL Z
H
XH X
L
Z = LOW to HIGH Transition
12/93
© Motorola, Inc. 1996
3–1
REV 2