MC10EL16_16 Datasheet, PDF (1/8 Pages) ON Semiconductor – 5.0 V ECL Differential Receiver

MC10EL16, MC100EL16
5.0 V ECL Differential
Receiver
Description
The MC10EL/100EL16 is a differential receiver. The device is
functionally equivalent to the E116 device with higher performance
capabilities. With output transition times significantly faster than the
E116, the EL16 is ideally suited for interfacing with high frequency
sources.
The V_BB pin, an internally generated voltage supply, is available to
this device only. For single-ended input conditions, the unused
differential input is connected to V_BB as a switching reference voltage.
V_BB may also rebias AC coupled inputs. When used, decouple V_BB
and V_CC via a 0.01 mF capacitor and limit current sourcing or sinking
to 0.5 mA. When not used, V_BB should be left open.
Under open input conditions (pulled to V_EE) internal input clamps
will force the Q output LOW.
The 100 Series contains temperature compensation.
Features
• 190 ps Propagation Delay
• PECL Mode Operating Range: V_CC = 4.2 V to 5.7 V with V_EE = 0 V
• NECL Mode Operating Range: V_CC = 0 V with V_EE = −4.2 V to −5.7 V
• Internal Input Pulldown Resistors
• These Devices are Pb-Free, Halogen Free and are RoHS Compliant
NC ¹
D2
D3
8 _VCC
7Q
6Q
V_BB 4
5 V_EE
Figure 1. Logic Diagram and Pinout Assignment
www.onsemi.com
8
1
SOIC−8 NB
D SUFFIX
CASE 751−07
8
1
TSSOP−8
DT SUFFIX
CASE 948R−02
MARKING DIAGRAMS*
8
HEL16
ALYW
G
1
8
HL16
ALYWG
G
1
8
KEL16
ALYW
G
1
SOIC−8 NB
8
KL16
ALYWG
G
1
TSSOP−8
H = MC10
K = MC100
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = Pb-Free Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information on page 6 of
this data sheet.
© Semiconductor Components Industries, LLC, 2016
1
July, 2016 − Rev. 9
Publication Order Number:
MC10EL16/D