MC10EL16 Datasheet, PDF (1/8 Pages) ON Semiconductor – Differential Receiver

MC10EL16, MC100EL16
5V ECL Differential
Receiver
The MC10EL/100EL16 is a differential receiver. The device is
functionally equivalent to the E116 device with higher performance
capabilities. With output transition times significantly faster than the E116,
the EL16 is ideally suited for interfacing with high frequency sources.
The V_BB pin, an internally generated voltage supply, is available to this
device only. For single-ended input conditions, the unused differential
input is connected to V_BB as a switching reference voltage. V_BB may also
rebias AC coupled inputs. When used, decouple V_BB and V_CC via a 0.01
mF capacitor and limit current sourcing or sinking to 0.5 mA. When not
used, V_BB should be left open.
Under open input conditions (pulled to V_EE) internal input clamps will
force the Q output LOW.
The 100 Series contains temperature compensation.
• 190 ps Propagation Delay
• PECL Mode Operating Range: V_CC = 4.2 V to 5.7 V with V_EE = 0 V
• NECL Mode Operating Range: V_CC = 0 V with V_EE = −4.2 V to −5.7 V
• Internal Input Pulldown Resistors
NC ¹
8 _VCC
http://onsemi.com
8
1
SO−8
D SUFFIX
CASE 751
MARKING
DIAGRAMS*
8
HEL16
ALYW
1
8
KEL16
ALYW
1
8
1
TSSOP−8
DT SUFFIX
CASE 948R
8
HL16
ALYW
1
8
KL16
ALYW
1
D2
D3
7Q
6Q
V_BB 4
5 V_EE
Figure 1. Logic Diagram and Pinout Assignment
PIN DESCRIPTION
PIN
D, D
Q, Q
V_BB
V_CC
V_EE
NC
FUNCTION
ECL Data Inputs
ECL Data Outputs
Reference Voltage Output
Positive Supply
Negative Supply
No Connect
H = MC10
K = MC100
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
Device
MC10EL16D
Package
SO−8
Shipping†
98 Units/Rail
MC10EL16DR2
MC100EL16D
SO−8
SO−8
2500 Tape & Reel
98 Units/Rail
MC100EL16DR2
SO−8 2500 Tape & Reel
MC10EL16DT
TSSOP−8 98 Units/Rail
MC10EL16DTR2 TSSOP−8 2500 Tape & Reel
MC100EL16DT TSSOP−8 98 Units/Rail
MC100EL16DTR2 TSSOP−8 2500 Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2003
1
November, 2003 − Rev. 5
Publication Order Number:
MC10EL16/D