MC10E452_06 Datasheet, PDF (1/8 Pages) ON Semiconductor – 5V ECL 5-Bit Differential Register

MC10E452, MC100E452
5V ECL 5-Bit Differential
Register
Description
The MC10E/100E452 is a 5-bit differential register with differential
data (inputs and outputs) and clock. The registers are triggered by a
positive transition of the positive clock (CLK) input. A high on the
Master Reset (MR) asynchronously resets all registers so that the Q
outputs go LOW.
The differential input structures are clamped so that the inputs of
unused registers can be left open without upsetting the bias network of
the device. The clamping action will assert the D and the CLK sides of
the inputs. Because of the edge triggered flip-flop nature of the device
simultaneously opening both the clock and data inputs will result in an
output which reaches an unidentified but valid state. Note that the
input clamps only operate when both inputs fall to 2.5 V below V_CC.
The fully differential design of the device makes it ideal for very
high frequency applications where a registered data path is necessary.
The V_BB pin, an internally generated voltage supply, is available to
this device only. For single-ended input conditions, the unused
differential input is connected to V_BB as a switching reference voltage.
V_BB may also rebias AC coupled inputs. When used, decouple V_BB
and V_CC via a 0.01 mF capacitor and limit current sourcing or sinking
to 0.5 mA. When not used, V_BB should be left open.
The 100 Series contains temperature compensation.
Features
• Differential D, CLK and Q; V_BB Reference Available
• 1100 MHz Min. Toggle Frequency
• Asynchronous Master Reset
• PECL Mode Operating Range: V_CC = 4.2 V to 5.7 V
with V_EE = 0 V
• NECL Mode Operating Range: V_CC = 0 V
with V_EE = −4.2 V to −5.7 V
• Internal Input 50 kW Pulldown Resistors, Output Q₃ will Default to
Low State When Inputs Are Left Open
• ESD Protection: Human Body Model; > 2 kV
Machine Model; > 200 V
Charged Device Model; > 2 kV
• Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
• Moisture Sensitivity Level:
Pb = 1
Pb−Free = 3
For Additional Information, see Application Note AND8003/D
• Flammability Rating: UL 94 V−0 @ 0.125 in,
Oxygen Index: 28 to 34
• Transistor Count = 315 devices
• Pb−Free Packages are Available*
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
http://onsemi.com
PLCC−28
FN SUFFIX
CASE 776
MARKING DIAGRAM*
1 28
MCxxxE452FNG
AWLYYWW
xxx
= 10 or 100
A
= Assembly Location
WL
= Wafer Lot
YY
= Year
WW = Work Week
G
= Pb−Free Package
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
© Semiconductor Components Industries, LLC, 2006
1
November, 2006 − Rev. 11
Publication Order Number:
MC10E452/D