MC10216 Datasheet, PDF (1/5 Pages) ON Semiconductor – High Speed Triple Line Receiver

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
High Speed Triple Line
Receiver
The MC10216 is a high speed triple differential amplifier designed for use in
sensing differential signals over long lines. The base bias supply (VBB) is made
available at pin 11 to make the device useful as a Schmitt trigger, or in other
applications where a stable reference voltage is necessary.
Active current sources provide the MC10216 with excellent common mode
noise rejection. If any amplifier in a package is not used, one input of that
amplifier must be connected to VBB (pin 11) to prevent upsetting the current
source bias network.
Complementary outputs are provided to allow driving twisted pair lines, to
enable cascading of several amplifiers in a chain, or simply to provide
complement outputs of the input logic function.
PD = 100 mW typ/pkg (No Load)
tpd = 1.8 ns typ (Single ended)
= 1.5 ns typ (Differential)
tr, tf = 1.5 ns typ (20%–80%)
LOGIC DIAGRAM
4
2
5
3
9
6
10
7
12
14
13
15
11
VBB
VCC1 = PIN 1
VCC2 = PIN 16
VEE = PIN 8
*VBB to be used to supply bias to the MC10216 only and bypassed (when used)
with 0.01 µF to 0.1 µF capacitor.
When the input pin with bubble goes positive, it’s respective output pin with bubble
goes positive.
MC10216
L SUFFIX
CERAMIC PACKAGE
CASE 620–10
P SUFFIX
PLASTIC PACKAGE
CASE 648–08
FN SUFFIX
PLCC
CASE 775–02
DIP
PIN ASSIGNMENT
VCC1
1
AOUT
2
AOUT
3
AIN
4
AIN
5
BOUT
6
BOUT
7
VEE
8
16
VCC2
15
COUT
14
COUT
13
CIN
12
CIN
11
VBB
10
BIN
9
BIN
Pin assignment is for Dual–in–Line Package.
For PLCC pin assignment, see the Pin Conversion
Tables on page 6–36 of the Motorola MECL Data
Book (DL122/D).
3/93
© Motorola, Inc. 1996
3–197
REV 5