MC10198P Datasheet, PDF (1/12 Pages) ON Semiconductor – Monostable Multivibrator

MC10198
Monostable Multivibrator
The MC10198 is a retriggerable monostable multivibrator. Two
enable inputs permit triggering on any combination of positive or
negative edges as shown in the accompanying table. The trigger input
is buffered by Schmitt triggers making it insensitive to input rise and
fall times.
The pulse width is controlled by an external capacitor and resistor.
The resistor sets a current which is the linear discharge rate of the
capacitor. Also, the pulse width can be controlled by an external
current source or voltage (see applications information).
For high–speed response with minimum delay, a hi–speed input is
also provided. This input bypasses the internal Schmitt triggers and the
output responds within 2 nanoseconds typically.
Output logic and threshold levels are standard MECL 10,000. Test
conditions are per Table 2. Each “Precondition” referred to in Table 2
is per the sequence of Table 1.
• P_D = 415 mW typ/pkg (No Load)
• t_pd = 4.0 ns typ Trigger Input to Q
•
2.0 ns typ Hi–Speed Input to Q
• Min Timing Pulse Width
• Max Timing Pulse Width
• Min Trigger Pulse Width
• Min Hi–Speed
PW_Qmin
PW_Qmax
PW_T
PW_HS
10 ns typ¹
>10 ms typ²
2.0 ns typ
3.0 ns typ
Trigger Pulse Width
• Enable Setup Time
t_set
• Enable Hold Time
t_hold
• ¹ C_Ext = 0 (Pin 4 open), R_Ext = 0
1.0 ns typ
1.0 ns typ
(Pin 6 to V_EE)
• ² C_Ext = 10 mF, R_Ext = 2.7 kW
http://onsemi.com
CDIP–16
L SUFFIX
CASE 620
PDIP–16
P SUFFIX
CASE 648
PLCC–20
FN SUFFIX
CASE 775
MARKING
DIAGRAMS
16
MC10198L
AWLYYWW
1
16
MC10198P
AWLYYWW
1
1
10198
AWLYYWW
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
ORDERING INFORMATION
Device
Package
Shipping
MC10198L
CDIP–16
25 Units / Rail
MC10198P
PDIP–16
25 Units / Rail
MC10198FN
PLCC–20
46 Units / Rail
© Semiconductor Components Industries, LLC, 2002
1
January, 2002 – Rev. 7
Publication Order Number:
MC10198/D