|
MC100LVEP210_14 Datasheet, PDF (1/9 Pages) ON Semiconductor – 2.5V / 3.3V 1:5 Dual Differential ECL/PECL/HSTL Clock Driver | |||
|
MC100LVEP210
2.5V / 3.3Vâ1:5 Dual
Differential ECL/PECL/HSTL
Clock Driver
Description
The MC100LVEP210 is a low skew 1âtoâ5 dual differential driver,
designed with clock distribution in mind. The ECL/PECL input
signals can be either differential or singleâended if the VBB output is
used. The signal is fanned out to 5 identical differential outputs. HSTL
inputs can be used when the EP210 is operating in PECL mode.
The LVEP210 specifically guarantees low outputâtoâoutput skew.
Optimal design, layout, and processing minimize skew within a device
and from device to device.
To ensure the tight skew specification is realized, both sides of the
differential output need to be terminated identically into 50 W even if
only one output is being used. If an output pair is unused, both outputs
may be left open (unterminated) without affecting skew.
The MC100LVEP210, as with most other ECL devices, can be
operated from a positive VCC supply in PECL mode. This allows the
LVEP210 to be used for high performance clock distribution in +3.3 V
or +2.5 V systems. Singleâended CLK input operation is limited to a
VCC ⥠3.0 V in PECL mode, or VEE ⤠â3.0 V in ECL mode.
Designers can take advantage of the LVEP210âs performance to
distribute low skew clocks across the backplane or the board. In a
PECL environment, series or Thevenin line terminations are typically
used as they require no additional power supplies. For more
information on using PECL, designers should refer to Application
Note AN1406/D.
Features
⢠85 ps Typical DeviceâtoâDevice Skew
⢠20 ps Typical OutputâtoâOutput Skew
⢠VBB Output
⢠Jitter Less than 1 ps RMS
⢠350 ps Typical Propagation Delay
⢠Maximum Frequency u 3 GHz Typical
⢠The 100 Series Contains Temperature Compensation
⢠PECL and HSTL Mode Operating Range: VCC = 2.375 V to 3.8 V
with VEE = 0 V
⢠NECL Mode Operating Range: VCC = 0 V
with VEE = â2.375 V to â3.8 V
⢠Open Input Default State
⢠LVDS Input Compatible
⢠Fully Compatible with MC100EP210
⢠These are PbâFree Devices
http://onsemi.com
MARKING
DIAGRAMS*
32âLEAD LQFP
FA SUFFIX
CASE 873A
MC100
LVEP21
AWLYYWWG
1 32
QFN32
MN SUFFIX
CASE 488AM
1
MC100
LVEP210
AWLYYWWG
G
A
WL
YY
WW
G or G
= Assembly Location
= Wafer Lot
= Year
= Work Week
= PbâFree Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
© Semiconductor Components Industries, LLC, 2014
1
May, 2014 â Rev. 15
Publication Order Number:
MC100LVEP210/D
|
▷ |