MC100H606FN Datasheet, PDF (1/7 Pages) ON Semiconductor – Registered Hex TTL to PECL Translator

MC10H606, MC100H606
Registered Hex TTL to
PECL Translator
Description
The MC10/100H606 is a 6−bit, registered, single supply TTL to
PECL translator. The device features differential PECL outputs as
well as a choice between either a differential PECL clock input or a
TTL clock input. The asynchronous master reset control is a PECL
level input.
With its differential PECL outputs and TTL inputs the H606 device
is ideally suited for the transmit function of a HPPI bus type
board−to−board interface application. The on chip registers simplify
the task of synchronizing the data between the two boards.
The device is available in either ECL standard: the MECL 10H™
device is compatible with MECL 10KH logic levels, with a V_CC of
+5.0 V while the 100H device is compatible with 100K logic levels,
with a V_CC of +5.0 V.
Features
• Differential 50 W ECL Outputs
• Choice Between Differential PECL or TTL Clock Input
• Single Power Supply
• Multiple Power and Ground Pins to Minimize Noise
• Pb−Free Packages are Available*
http://onsemi.com
PLCC−28
FN SUFFIX
CASE 776
MARKING DIAGRAM*
1
MCxxxH606G
AWLYYWW
xxx = 10 or 100
A
= Assembly Location
WL = Wafer Lot
YY
= Year
WW = Work Week
G
= Pb−Free Package
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 5 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
1
November, 2006 − Rev. 6
Publication Order Number:
MC10H606/D