MC100EP16VS Datasheet, PDF (1/12 Pages) ON Semiconductor – 3.3V / 5V ECL Differential Receiver/Driver with Variable Output Swing

MC100EP16VS
3.3V / 5V ECL Differential
Receiver/Driver with
Variable Output Swing
Description
The MC100EP16VS is a differential receiver with variable output
amplitude. The device is functionally equivalent to the 100EP16 with
an input pin that controls the amplitude of the outputs.
The V_CTRL input pin controls the output amplitude of the EP16VS
and is referenced to V_CC. (See Figure 4.) The operational range of the
V_CTRL input is from ≤ V_BB (max output amplitude) to V_CC (min
output amplitude). (See Figure 3.) A variable resistor between the V_CC
and V_BB pins, with the wiper driving V_CTRL, can control the output
amplitude. Typical application circuits and a V_CTRL Voltage vs.
Output Amplitude graph are described in this data sheet. When left
open, the V_CTRL pin will be internally pulled down to V_EE and operate
as a standard EP16, with 100% output amplitude.
The V_BB pin, an internally generated voltage supply, is available to
this device only. For single−ended input conditions, the unused
differential input is connected to V_BB as a switching reference voltage.
V_BB may also rebias AC coupled inputs. When used, decouple V_BB
and V_CC via a 0.01 mF capacitor and limit current sourcing or sinking
to 0.5 mA. When not used, V_BB should be left open.
Features
• 220 ps Propagation Delay
• Maximum Frequency > 4 GHz Typical (See Graph)
• The 100 Series Contains Temperature Compensation
• PECL Mode Operating Range: V_CC = 3.0 V to 5.5 V
with V_EE = 0 V
• NECL Mode Operating Range: V_CC = 0 V
with V_EE = −3.0 V to −5.5 V
• Open Input Default State
• Q Output Will Default LOW with Inputs Open or at V_EE
• Pb−Free Packages are Available
http://onsemi.com
MARKING
DIAGRAMS*
8
1
SOIC−8
D SUFFIX
CASE 751
8
KEP62
ALYW
G
1
8
1
TSSOP−8
DT SUFFIX
CASE 948R
8
KP62
ALYWG
G
1
DFN8
MN SUFFIX
CASE 506AA
14
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
© Semiconductor Components Industries, LLC, 2006
1
December, 2006 − Rev. 5
Publication Order Number:
MC100EP16VS/D