MC100EP16VC_16 Datasheet, PDF (1/10 Pages) ON Semiconductor – 3.3V / 5V ECL Differential Receiver/Driver

MC100EP16VC
3.3 V / 5 V ECL Differential
Receiver/Driver with High
Gain and Enable Output
Description
The EP16VC is a differential receiver/driver. The device is
functionally equivalent to the EP16 and LVEP16 devices but with high
gain and enable output.
The EP16VC provides an EN input which is synchronized with the
data input (D) signal in a way that provides glitchless gating of the
QHG and QHG outputs.
When the EN signal is LOW, the input is passed to the outputs and
the data output equals the data input. When the data input is HIGH and
EN goes HIGH, it will force the Q_HG LOW and the Q_HG HIGH on the
next negative transition of the data input. If the data input is LOW
when the EN goes HIGH, the next data transition to a HIGH is ignored
and Q_HG remains LOW and Q_HG remains HIGH. The next positive
transition of the data input is not passed on to the data outputs under
these conditions. The Q_HG and Q_HG outputs remain in their disabled
state as long as the EN input is held HIGH. The EN input has no
influence on the Q output and the data input is passed on (inverted) to
this output whether EN is HIGH or LOW. This configuration is ideal
for crystal oscillator applications where the oscillator can be free
running and gated on and off synchronously without adding extra
counts to the output.
The V_BB/D pin is internally dedicated and available for differential
interconnect. V_BB/D may rebias AC coupled inputs. When used,
decouple V_BB/D and V_CC via a 0.01 mF capacitor and limit current
sourcing or sinking to 1.5 mA. When not used, V_BB/D should be left
open.
The 100 Series contains temperature compensation.
Features
• 310 ps Typical Prop Delay Q,
380 ps Typical Prop Delay QHG, QHG
• Gain > 200
• Maximum Frequency > 3 GHz Typical
• PECL Mode Operating Range:
♦ V_CC = 3.0 V to 5.5 V with V_EE = 0 V
• NECL Mode Operating Range:
♦ V_CC = 0 V with V_EE = −3.0 V to −5.5 V
• Open Input Default State
• Q_HG Output Will Default LOW with D Inputs Open or at V_EE
• V_BB Output
• These Devices are Pb-Free, Halogen Free and are RoHS Compliant
© Semiconductor Components Industries, LLC, 2016
1
August, 2016 − Rev. 8
www.onsemi.com
8
1
SOIC−8 NB
D SUFFIX
CASE
751−07
8
1
TSSOP−8
DT SUFFIX
CASE
948R−02
DFN−8
MN SUFFIX
CASE 506AA
MARKING DIAGRAMS*
8
KEP66
ALYW
G
1
8
KP66
ALYWG
G
1
14
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
M = Date Code
G = Pb-Free Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
Device
Package Shipping^†
MC100EP16VCDG
SOIC−8 NB
(Pb-Free)
98 Units/Tube
MC100EP16VCDR2G SOIC−8 NB 2500/Tape & Reel
(Pb-Free)
MC100EP16VCDTG
TSSOP−8
(Pb-Free)
100 Units/Tube
MC100EP16VCDTR2G TSSOP−8 2500/Tape & Reel
(Pb-Free)
MC100EP16VCMNR4G DFN−8 1000/Tape & Reel
(Pb-Free)
†For information on tape and reel specifications, in-
cluding part orientation and tape sizes, please refer
to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Publication Order Number:
MC10EP16VC/D