MC100EL14_06 Datasheet, PDF (1/8 Pages) ON Semiconductor – 5V ECL 1:5 Clock Distribution Chip

MC100EL14
5V ECL 1:5 Clock
Distribution Chip
The MC100EL14 is a low skew 1:5 clock distribution chip designed
explicitly for low skew clock distribution applications. The V_BB pin, an
internally generated voltage supply, is available to this device only.
For single-ended input conditions, the unused differential input is
connected to V_BB as a switching reference voltage. V_BB may also
rebias AC coupled inputs. When used, decouple V_BB and V_CC via a
0.01 mF capacitor and limit current sourcing or sinking to 0.5 mA.
When not used, V_BB should be left open.
The EL14 features a multiplexed clock input to allow for the
distribution of a lower speed scan or test clock along with the high speed
system clock. When LOW (or left open and pulled LOW by the input
pulldown resistor) the SEL pin will select the differential clock input.
The common enable (EN) is synchronous so that the outputs will only
be enabled/disabled when they are already in the LOW state. This
avoids any chance of generating a runt clock pulse when the device is
enabled/disabled as can happen with an asynchronous control. The
internal flip flop is clocked on the falling edge of the input clock,
therefore all associated specification limits are referenced to the
negative edge of the clock input.
Features
• 50 ps Output-to-Output Skew
• Synchronous Enable/Disable
• Multiplexed Clock Input
• The 100 Series Contains Temperature Compensation
• PECL Mode Operating Range: V_CC = 4.2 V to 5.7 V
with V_EE = 0 V
• NECL Mode Operating Range: V_CC = 0 V
with V_EE = −4.2 V to −5.7 V
• Q Output will Default LOW with Inputs Open or at V_EE
• Internal Input Pull−down Resistors on All Inputs, Pull−up Resistors
on Inverted Inputs
• Pb−Free Packages are Available*
http://onsemi.com
SOIC−20L
DW SUFFIX
CASE 751D
MARKING DIAGRAM
20
100EL14
AWLYYWWG
1
A
= Assembly Location
WL = Wafer Lot
YY
= Year
WW = Work Week
G
= Pb−Free Package
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
1
October, 2006 − Rev. 7
Publication Order Number:
MC100EL14/D