MBRS2040LT3 Datasheet, PDF (1/6 Pages) Motorola, Inc – Surface Mount Schottky Power Rectifier(SMB Power Surface Mount Package)

MBRS2040LT3
Surface Mount
Schottky Power Rectifier
SMB Power Surface Mount Package
. . . employing the Schottky Barrier principle in a metal−to−silicon
power rectifier. Features epitaxial construction with oxide passivation
and metal overlay contact. Ideally suited for low voltage, high
frequency switching power supplies; free wheeling diodes and
polarity protection diodes.
• Compact Package with J−Bend Leads Ideal for Automated Handling
• Highly Stable Oxide Passivated Junction
• Guardring for Over−Voltage Protection
• Low Forward Voltage Drop
• Pb−Free Package May be Available. The G−Suffix Denotes a
Pb−Free Lead Finish
Mechanical Characteristics:
• Case: Molded Epoxy
• Epoxy Meets UL94, VO at 1/8″
• Weight: 95 mg (approximately)
• Maximum Temperature of 260°C / 10 Seconds for Soldering
• Cathode Polarity Band
• Available in 12 mm Tape, 2500 Units per 13 inch Reel, Add “T3”
Suffix to Part Number
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Marking: BKJL
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
VRRM
40
V
Working Peak Reverse Voltage
VRWM
DC Blocking Voltage
VR
Average Rectified Forward Current
IO
(At Rated VR, TC = 103°C)
2.0
A
Peak Repetitive Forward Current
IFRM
4.0
A
(At Rated VR, Square Wave,
20 kHz, TC = 104°C)
Non−Repetitive Peak Surge Current
IFSM
70
A
(Surge Applied at Rated Load
Conditions Halfwave, Single
Phase, 60 Hz)
Storage/Operating Case
Temperature
Tstg, TC −55 to +150 °C
Operating Junction Temperature
Voltage Rate of Change
(Rated VR, TJ = 25°C)
TJ
dv/dt
−55 to +125 °C
10,000
V/ms
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
2.0 AMPERES
40 VOLTS
SMB
CASE 403A
PLASTIC
MARKING DIAGRAM
BKJL
BKJL = Device Code
ORDERING INFORMATION
Device
Package
Shipping^†
MBRS2040LT3
SMB
MBRS2040LT3G SMB
(Pb−Free)
2500/Tape & Reel
2500/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2003
1
December, 2003 − Rev. 3
Publication Order Number:
MBRS2040LT3/D