MBRS140LT3 Datasheet, PDF (1/8 Pages) Motorola, Inc – Surface Mount Schottky Power Rectifier(SMB Power Mount Power Package)

MBRS140LT3
Surface Mount
Schottky Power Rectifier
SMB Power Surface Mount Package
. . . employing the Schottky Barrier principle in a metal–to–silicon
power rectifier. Features epitaxial construction with oxide passivation
and metal overlay contact. Ideally suited for low voltage, high
frequency switching power supplies; free wheeling diodes and
polarity protection diodes.
• Compact Package with J–Bend Leads Ideal for Automated Handling
• Highly Stable Oxide Passivated Junction
• Guardring for Over–Voltage Protection
• Low Forward Voltage Drop
Mechanical Characteristics:
• Case: Molded Epoxy
• Epoxy Meets UL94, VO at 1/8″
• Weight: 95 mg (approximately)
• Cathode Polarity Band
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Available in 12 mm Tape, 2500 Units per 13″ Reel, Add “T3” Suffix
to Part Number
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Marking: B14L
MAXIMUM RATINGS
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
(At Rated V_R, T_C = 110°C)
Peak Repetitive Forward Current
(At Rated V_R, Square Wave,
100 kHz, T_C = 110°C)
Non–Repetitive Peak Surge Current
(Surge Applied at Rated Load
Conditions Halfwave, Single
Phase, 60 Hz)
Storage/Operating Case
Temperature
Operating Junction Temperature
Voltage Rate of Change
(Rated V_R, T_J = 25°C)
Symbol
V_RRM
V_RWM
V_R
I_O
I_FRM
Value
40
1.0
2.0
Unit
V
A
A
I_FSM
40
A
T_stg, T_C –55 to +150 °C
T_J
dv/dt
–55 to +125 °C
10,000
V/ms
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
1.0 AMPERE
40 VOLTS
SMB
CASE 403A
PLASTIC
MARKING DIAGRAM
B14L
B14L = Device Code
ORDERING INFORMATION
Device
Package
Shipping
MBRS140LT3
SMB
2500/Tape & Reel
© Semiconductor Components Industries, LLC, 2000
1
October, 2000 – Rev. 2
Publication Order Number:
MBRS140LT3/D