MBRD5H100T4G_0712 Datasheet, PDF (1/5 Pages) ON Semiconductor – SWITCHMODE Schottky Power Rectifier

MBRD5H100T4G
SWITCHMODEt
Schottky Power Rectifier
Surface Mount Power Package
This series of Power Rectifiers employs the Schottky Barrier
principle in a large metal-to-silicon power diode. State-of-the-art
geometry features epitaxial construction with oxide passivation and
metal overlay contact. Ideally suited for use in low voltage, high
frequency switching power supplies, free wheeling diodes, and
polarity protection diodes.
Features
•ăGuardring for Stress Protection
•ăLow Forward Voltage
•ă175°C Operating Junction Temperature
•ăEpoxy Meets UL 94 V-0 @ 0.125 in
•ăShort Heat Sink Tab Manufactured - Not Sheared!
•ăThis is a Pb-Free Device
Mechanical Characteristics:
•ăCase: Epoxy, Molded, Epoxy Meets UL 94 V-0
•ăWeight: 0.4 grams (approximately)
•ăFinish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
•ăLead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
•ăDevice Meets MSL1 Requirements
•ăESD Ratings: Machine Model, C (>400 V)
Human Body Model, 3B (>8000 V)
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
100
V
V_RWM
V_R
Average Rectified Forward Current
I_F(AV)
5
A
(Rated V_R) T_C = 171°C
Peak Repetitive Forward Current
I_FRM
10
A
(Rated V_R, Square Wave, 20 kHz)
T_C = 171°C
Nonrepetitive Peak Surge Current
I_FSM
105
A
(Surge applied at rated load conditions
halfwave, single phase, 60 Hz)
Operating Junction and Storage
Temperature Range (Note 1)
T_J, T_stg -ā65 to +175 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. The heat generated must be less than the thermal conductivity from
Junction-to-Ambient: dP_D/dT_J < 1/R_qJA.
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
5 AMPERES, 100 VOLTS
1
4
3
(Pin 1: No Connect)
12
3
4
DPAK
CASE 369C
MARKING
DIAGRAM
YWW
B
5100G
Y
WW
B5100
G
= Year
= Work Week
= Device Code
= Pb-Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
©Ă Semiconductor Components Industries, LLC, 2007
1
December, 2007 - Rev. 2
Publication Order Number:
MBRD5H100/D