MBRB2515L Datasheet, PDF (1/4 Pages) Motorola, Inc – SWITCHMODE™ Power Rectifier D2PAK Surface Mount Power Package

MBRB2515L
Preferred Device
SWITCHMODEt
Power Rectifier
ORing Function Diode
D²PAK Surface Mount Power Package
The D²PAK Power Rectifier employs the Schottky Barrier principle
in a large metal−to−silicon power diode. State−of−the−art geometry
features epitaxial construction with oxide passivation and metal
overlay contact. Ideally suited for use in low voltage, high frequency
switching power supplies, free wheeling diodes, and polarity
protection diodes.
Features
• Guardring for Stress Protection
• Low Forward Voltage
• 100°C Operating Junction Temperature
• Epoxy Meets UL 94 V−0 @ 0.125 in
• Short Heat Sink Tab Manufactured − Not Sheared
• Similar in Size to the Industry Standard TO−220 Package
• Pb−Free Packages are Available
Mechanical Characteristics:
• Case: Epoxy, Molded, Epoxy Meets UL 94 V−0
• Weight: 1.7 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Device Meets MSL1 Requirements
• ESD Ratings: Machine Model, C (>400 V)
Human Body Model, 3B (>8000 V)
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
15
V
V_RWM
V_R
Average Rectified Forward Current
(Rated V_R, T_C = 90°C)
I_F(AV)
25
A
Peak Repetitive Forward Current
(Rated V_R, Square Wave,
20 kHz, T_C = 100°C)
I_FRM
30
A
Non−Repetitive Peak Surge Current
I_FSM
150
A
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
Storage Temperature Range
T_stg −65 to +150 °C
Operating Junction Temperature
T_J
100
°C
Voltage Rate of Change (Rated V_R)
dv/dt
10,000 V/ms
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
© Semiconductor Components Industries, LLC, 2005
1
September, 2005 − Rev. 6
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
25 AMPERES, 15 VOLTS
1
4
3
4
1
3
D²PAK
CASE 418B
STYLE 3
MARKING DIAGRAM
AY WW
B2515LG
AKA
A
Y
WW
B2515L
G
AKA
= Assembly Location
= Year
= Work Week
= Device Code
= Pb−Free Package
= Diode Polarity
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
MBRB2515L/D