MBRB2060CT Datasheet, PDF (1/5 Pages) ON Semiconductor – SWITCHMODE Power Rectifiers TO−220/D2PAK Surface Mount Power Package

MBRB2060CT, MBR2060CT
SWITCHMODEt
Power Rectifiers
TO−220/D²PAK Surface Mount Power
Package
These state−of−the−art devices employ the use of the Schottky
Barrier principle with a platinum barrier metal.
Features
• Package Designed for Power Surface Mount Applications (D²PAK)
• Center−Tap Configuration (D²PAK)
• Guardring for Stress Protection
• Low Forward Voltage
• 175°C Operating Junction Temperature
• Epoxy Meets UL 94 V−0 @ 0.125 in
• Short Heat Sink Tab Manufactured − Not Sheared (D²PAK)
• Similar in Size to Industry Standard TO−220 Package
• Pb−Free Packages are Available
Mechanical Characteristics:
• Case: Epoxy, Molded, Epoxy Meets UL 94 V−0
• Weight: 1.7 Grams (Approximately) − D²PAK,
1.9 Grams (Approximately) − TO−220
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds (D²PAK)
• Device Meets MSL1 Requirements (D²PAK)
• ESD Ratings: Machine Model, C (>400 V)
Human Body Model, 3B (>8000 V)
MAXIMUM RATINGS (Per Leg)
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
60
V
V_RWM
V_R
Average Rectified Forward Current
I_F(AV)
10
A
(Rated V_R, T_C = 110°C) Total Device
20
Peak Repetitive Forward Current
(Rated V_R, Square Wave,
20 kHz, T_C = 100°C)
I_FRM
20
A
Non−Repetitive Peak Surge Current
I_FSM
150
A
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
Peak Repetitive Reverse Surge Current
I_RRM
0.5
A
(2.0 ms, 1.0 kHz)
Storage Temperature Range
T_stg −65 to +175 °C
Operating Junction Temperature (Note 1)
T_J
−65 to +175 °C
Voltage Rate of Change (Rated V_R)
dv/dt
10,000
V/ms
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. The heat generated must be less than the thermal conductivity from
Junction−to−Ambient: dP_D/dT_J < 1/R_qJA.
© Semiconductor Components Industries, LLC, 2009
1
September, 2009 − Rev. 8
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIERS
20 AMPERES, 60 VOLTS
1
4
3
4
4
1
3
D²PAK
CASE 418B
STYLE 3
1
2
3
TO−220AB
CASE 221A
STYLE 6
MARKING DIAGRAMS
AY WW
B2060G
AKA
AY WW
B2060G
AKA
A
Y
WW
B2060
G
AKA
= Assembly Location
= Year
= Work Week
= Device Code
= Pb−Free Package
= Diode Polarity
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
Publication Order Number:
MBRB2060CT/D