MBRB20100CT_09 Datasheet, PDF (1/4 Pages) ON Semiconductor – SWITCHMODE Power Rectifier

MBRB20100CT
SWITCHMODEt
Power Rectifier
D²PAK Surface Mount Power Package
The D²PAK Power Rectifier is a state−of−the−art device that
employs the use of the Schottky Barrier principle with a platinum
barrier metal.
Features
• Package Designed for Power Surface Mount Applications
• Center−Tap Configuration
• Guardring for Stress Protection
• Low Forward Voltage
• 175°C Operating Junction Temperature
• Epoxy Meets UL 94 V−0 @ 0.125 in
• Short Heat Sink Tab Manufactured − Not Sheared!
• Similar in Size to Industry Standard TO−220 Package
• Pb−Free Packages are Available
Mechanical Characteristics
• Case: Epoxy, Molded, Epoxy Meets UL 94 V−0
• Weight: 1.4 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Device Meets MSL1 Requirements
• ESD Ratings: Machine Model, C >400 V
Human Body Model, 3B >8000 V
MAXIMUM RATINGS (Per Leg)
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
100
V
V_RWM
V_R
Average Rectified Forward Current
I_F(AV)
10
A
(Rated V_R, T_C = 110°C) Total Device
20
Peak Repetitive Forward Current (Rated
I_FRM
20
A
V_R, Square Wave, 20 kHz, T_C = 100°C)
Non−Repetitive Peak Surge Current
I_FSM
150
A
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
Peak Repetitive Reverse Surge Current
I_RRM
0.5
A
(2.0 ms, 1.0 kHz)
Storage Temperature Range
T_stg −65 to +175 °C
Operating Junction Temperature (Note 1)
T_J
−65 to +175 °C
Voltage Rate of Change (Rated V_R)
dv/dt
10,000 V/ms
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. The heat generated must be less than the thermal conductivity from
Junction−to−Ambient: dP_D/dT_J < 1/R_qJA.
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
20 AMPERES
100 VOLTS
1
4
3
1
3
4
D²PAK
CASE 418B
STYLE 3
MARKING DIAGRAM
AY WW
B20100G
AKA
A
Y
WW
B20100
G
AKA
= Assembly Location
= Year
= Work Week
= Device Code
= Pb−Free Package
= Diode Polarity
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
© Semiconductor Components Industries, LLC, 2009
1
May, 2009 − Rev. 8
Publication Order Number:
MBRB20100CT/D