MBRB20100CT Datasheet, PDF (1/4 Pages) Motorola, Inc – SWITCHMODE™ Power Rectifier D2PAK Surface Mount Power Package

MBRB20100CT
Preferred Device
SWITCHMODEt
Power Rectifier
D²PAK Surface Mount Power Package
The D²PAK Power Rectifier is a state−of−the−art device that
employs the use of the Schottky Barrier principle with a platinum
barrier metal.
Features
• Package Designed for Power Surface Mount Applications
• Center−Tap Configuration
• Guardring for Stress Protection
• Low Forward Voltage
• 175°C Operating Junction Temperature
• Epoxy Meets UL 94 V−0 @ 0.125 in
• Short Heat Sink Tab Manufactured − Not Sheared!
• Similar in Size to Industry Standard TO−220 Package
• Pb−Free Packages are Available
Mechanical Characteristics
• Case: Epoxy, Molded, Epoxy Meets UL 94 V−0
• Weight: 1.7 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Device Meets MSL1 Requirements
• ESD Ratings: Machine Model, C >400 V
Human Body Model, 3B >8000 V
MAXIMUM RATINGS (Per Leg)
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
100
V
V_RWM
V_R
Average Rectified Forward Current
I_F(AV)
10
A
(Rated V_R, T_C = 110°C) Total Device
20
Peak Repetitive Forward Current (Rated
I_FRM
20
A
V_R, Square Wave, 20 kHz, T_C = 100°C)
Non−Repetitive Peak Surge Current
I_FSM
150
A
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
Peak Repetitive Reverse Surge Current
I_RRM
0.5
A
(2.0 ms, 1.0 kHz)
Storage Temperature Range
T_stg −65 to +175 °C
Operating Junction Temperature (Note 1)
T_J
−65 to +175 °C
Voltage Rate of Change (Rated V_R)
dv/dt
10,000 V/ms
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
1. The heat generated must be less than the thermal conductivity from
Junction−to−Ambient: dP_D/dT_J < 1/R_qJA.
© Semiconductor Components Industries, LLC, 2006
1
February, 2006 − Rev. 6
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
20 AMPERES
100 VOLTS
1
4
3
1
3
4
D²PAK
CASE 418B
STYLE 3
MARKING DIAGRAM
AY WW
B20100G
AKA
A
Y
WW
B20100
G
AKA
= Assembly Location
= Year
= Work Week
= Device Code
= Pb−Free Package
= Diode Polarity
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
MBRB20100CT/D