MBRA340T3_06 Datasheet, PDF (1/5 Pages) ON Semiconductor – Surface Mount Schottky Power Rectifier SMA Power Surface Mount Package

MBRA340T3
Surface Mount
Schottky Power Rectifier
SMA Power Surface Mount Package
Employing the Schottky Barrier principle in a large area
metal−to−silicon power diode. State of the art geometry features
epitaxial construction with oxide passivation and metal overlay
contact. Ideally suited for low voltage, high frequency rectification, or
as free wheeling and polarity diodes in surface mount applications
where compact size and weight are critical to the system.
Features
• Small Compact Surface Mountable Package with J−Bent Leads
• Rectangular Package for Automated Handling
• Highly Stable Oxide Passivated Junction
• Very Low Forward Voltage Drop
• Guardring for Stress Protection
• Pb−Free Package is Available
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 70 mg (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Shipped in 12 mm tape, 5000 units per 13 inch reel
• Polarity: Cathode Lead Indicated by Polarity Band
• ESD Ratings: Machine Model = C
ESD Ratings: Human Body Model = 3B
• Device Meets MSL 1 Requirements
MAXIMUM RATINGS
Rating
Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
40
V
V_RWM
V_R
Average Rectified Forward Current
(At Rated V_R, T_L = 100°C)
I_O
3.0
A
Non−Repetitive Peak Surge Current
I_FSM
100
A
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
Storage/Operating Case Temperature
T_stg, T_C −55 to +150 °C
Operating Junction Temperature (Note 1)
T_J
−55 to +150 °C
Voltage Rate of Change
(Rated V_R, T_J = 25°C)
dv/dt
10,000 V/ms
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. The heat generated must be less than the thermal conductivity from
Junction−to−Ambient: dP_D/dT_J < 1/R_qJA.
© Semiconductor Components Industries, LLC, 2006
1
October, 2006 − Rev. 4
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
3.0 AMPERES
40 VOLTS
1
Cathode
2
Anode
1
2
SMA
CASE 403D
PLASTIC
MARKING DIAGRAM
A34
AYWWG
A34 = Device Code
A
= Assembly Location
Y
= Year
WW = Work Week
G
= Pb−Free Package
ORDERING INFORMATION
Device
Package
Shipping^†
MBRA340T3
SMA
5000/Tape & Reel
MBRA340T3G
SMA
(Pb−Free)
5000/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
Publication Order Number:
MBRA340T3/D