MBRA320T3G Datasheet, PDF (1/5 Pages) ON Semiconductor – Surface Mount Schottky Power Rectifier

MBRA320T3G
Surface Mount
Schottky Power Rectifier
SMA Power Surface Mount Package
Employing the Schottky Barrier principle in a large area
metal−to−silicon power diode. State of the art geometry features
epitaxial construction with oxide passivation and metal overlay
contact. Ideally suited for low voltage, high frequency rectification, or
as free wheeling and polarity diodes in surface mount applications
where compact size and weight are critical to the system.
Features
• Small Compact Surface Mountable Package with J−Bent Leads
• Rectangular Package for Automated Handling
• Highly Stable Oxide Passivated Junction
• Very Low Forward Voltage Drop
• Guardring for Stress Protection
• NRVBA Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
• These are Pb−Free Devices
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 70 mg (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Shipped in 12 mm tape, 5000 units per 13 inch reel
• Polarity: Cathode Lead Indicated by Polarity Band
• ESD Ratings: Machine Model = C
ESD Ratings: Human Body Model = 3B
• Device Meets MSL 1 Requirements
MAXIMUM RATINGS
Rating
Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
(At Rated V_R, T_L = 100°C)
V_RRM
20
V
V_RWM
V_R
I_O
3.0
A
Non−Repetitive Peak Surge Current
I_FSM
80
A
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
Storage Temperature
T_stg −65 to +150 °C
Operating Junction Temperature
T_J
−65 to +125 °C
Voltage Rate of Change
(Rated V_R, T_J = 25°C)
dv/dt
10,000 V/ms
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
3.0 AMPERES
20 VOLTS
1
Cathode
2
Anode
2
1
SMA
CASE 403D
MARKING DIAGRAM
A32
AYWWG
A32 = Device Code
A
= Assembly Location
Y
= Year
WW = Work Week
G
= Pb−Free Package
ORDERING INFORMATION
Device
Package
Shipping^†
MBRA320T3G
NRVBA320T3G
SMA
(Pb−Free)
SMA
(Pb−Free)
5000/Tape & Reel
5000/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2014
1
May, 2014 − Rev. 1
Publication Order Number:
MBRA320/D