MBRA130LT3 Datasheet, PDF (1/4 Pages) Motorola, Inc – Surface Mount Schottky Power Rectifier

MBRA130LT3
Surface Mount Schottky
Power Rectifier
SMA Power Surface Mount Package
This device employs the Schottky Barrier principle in a
metal−to−silicon power rectifier. Features epitaxial construction with
oxide passivation and metal overlay contact. Ideally suited for low
voltage, high frequency switching power supplies; free wheeling
diodes and polarity protection diodes.
Features
• Compact Package with J−Bend Leads Ideal for Automated Handling
• Highly Stable Oxide Passivated Junction
• Guardring for Over−Voltage Protection
• Low Forward Voltage Drop
• Pb−Free Package is Available
Mechanical Characteristics:
• Case: Molded Epoxy
• Epoxy Meets UL 94 V−0 @ 0.125 in
• Weight: 70 mg (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Polarity: Cathode Lead Indicated by Either Notch in Plastic Body or
Polarity Band
• Available in 12 mm Tape, 5000 Units per 13 inch Reel, Add “T3”
Suffix to Part Number
• Device Meets MSL1 Requirements
• ESD Ratings: Machine Model, C (>400 V)
Human Body Model, 3B (>8000 V)
MAXIMUM RATINGS
Rating
Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
30
V
V_RWM
V_R
Average Rectified Forward Current
(At Rated V_R, T_C = 105°C)
I_O
1.0
A
Peak Repetitive Forward Current
(At Rated V_R, Square Wave, 100 kHz,
T_C = 105°C)
I_FRM
2.0
A
Non−Repetitive Peak Surge Current
I_FSM
25
A
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
Storage Temperature
T_stg −55 to +150 °C
Operating Junction Temperature
T_J −55 to +125 °C
Voltage Rate of Change, (Rated V_R, T_J = 25°C) dv/dt
10,000 V/ms
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
© Semiconductor Components Industries, LLC, 2005
1
February, 2005 − Rev. 7
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
1.0 AMPERES, 30 VOLTS
SMA
CASE 403D
PLASTIC
MARKING DIAGRAM
B1L3
ALYW
B1L3
A
L
Y
W
= Device Code
= Assembly Location
= Wafer Lot
= Year
= Work Week
ORDERING INFORMATION
Device
Package
Shipping^†
MBRA130LT3
SMA
5000/Tape & Reel
MBRA130LT3G
SMA
5000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
Publication Order Number:
MBRA130LT3/D