MBRA120LT3 Datasheet, PDF (1/4 Pages) ON Semiconductor – Surface Mount Schottky Power Rectifier

MBRA120LT3
Surface Mount
Schottky Power Rectifier
SMA Power Surface Mount Package
. . . employing the Schottky Barrier principle in a metal–to–silicon
power rectifier. Features epitaxial construction with oxide passivation
and metal overlay contact. Ideally suited for low voltage, high
frequency switching power supplies; free wheeling diodes and
polarity protection diodes.
• Compact Package with J–Bend Leads Ideal for Automated Handling
• Highly Stable Oxide Passivated Junction
• Guardring for Over–Voltage Protection
• Optimized for Low Leakage Current
Mechanical Characteristics:
• Case: Molded Epoxy
• Epoxy Meets UL94, VO at 1/8″
• Weight: 70 mg (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Polarity: Polarity Band Indicates Cathode Lead
• Available in 12 mm Tape, 5000 Units per 13 inch Reel
• ESD Protection: Human Body Model > 4000 V (Class 3)
ESD Protection: Machine Model > 400 V (Class C)
• Marking: B1L2
MAXIMUM RATINGS
Rating
Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
20
V
VRWM
VR
Average Rectified Forward Current
(At Rated VR, TL = 110°C)
IO
1.0
A
Non–Repetitive Peak Surge Current
IFSM
40
A
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
Storage/Operating Case Temperature
Operating Junction Temperature
Tstg, TC –55 to
°C
TJ
+125
Voltage Rate of Change
(Rated VR, TJ = 25°C)
dv/dt 10,000 V/ms
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
1 AMPERE
20 VOLTS
SMA
CASE 403D
PLASTIC
MARKING
DIAGRAM
B1L2
B1L2 = Device Code
ORDERING INFORMATION
Device
Package
Shipping
MBRA120LT3
SMA
5000/Tape & Reel
© Semiconductor Components Industries, LLC, 2002
1
April, 2002 – Rev. 1
Publication Order Number:
MBRA120LT3/D