MBR7030WTG Datasheet, PDF (1/4 Pages) ON Semiconductor – Switch Mode Power Rectifier

MBR7030WTG
Switch Mode
Power Rectifier
The Switch Mode power rectifier, a state−of−the−art device,
employs the use of the Schottky Barrier principle with a Platinum
barrier metal.
Features
• Dual Diode Construction; Terminals 1 and 3 May Be Connected for
Parallel Operation at Full Rating
• 30 V Blocking Voltage
• Low Forward Voltage Drop
• Guardring for Stress Protection and High dv/dt Capability
• 175°C Operating Junction Temperature
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant*
Mechanical Characteristics
• Case: Epoxy, Molded. Epoxy Meets UL 94 V−0 @ 0.125 in
• Weight: 4.3 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• ESD Ratings: Machine Model, B (< 400 V)
Human Body Model, 3B (> 8000 V)
MAXIMUM RATINGS
Rating
Symbol
Max
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
30
V
V_RWM
V_R
Average Rectified Forward Current
I_F(AV)
A
(Rated V_R, T_C = 100°C)
Per Leg
35
Per Device
70
Peak Repetitive Forward Current,
(Rated V_R, Square Wave,
20 kHz, T_C = 100°C)
I_FRM
70
A
Non−Repetitive Peak Surge Current
I_FSM
500
A
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
Peak Repetitive Reverse Current
(2.0 ms, 1.0 kHz)
I_RRM
2.0
A
Storage Temperature Range
T_stg −55 to +175 °C
Operating Junction Temperature (Note 1) T_J −55 to +175 °C
Voltage Rate of Change (Rated V_R)
dv/dt
10,000
V/ms
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. The heat generated must be less than the thermal conductivity from
Junction−to−Ambient: dP_D/dT_J < 1/R_qJA.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
70 AMPERES, 30 VOLTS
1
2, 4
3
1
2
3
TO−247
CASE 340AL
MARKING DIAGRAM
MBR7030WT
AYWWG
A
= Assembly Location
Y
= Year
WW = Work Week
G
= Pb−Free Package
ORDERING INFORMATION
Device
MBR7030WTG
Package
TO−247
(Pb−Free)
Shipping
30 Units/Rail
© Semiconductor Components Industries, LLC, 2014
1
July, 2014 − Rev. 4
Publication Order Number:
MBR7030WT/D