MBR6045WTG Datasheet, PDF (1/3 Pages) ON Semiconductor – Switch Mode Power Rectifier

MBR6045WTG
Switch Mode
Power Rectifier
The Switch Mode power rectifier employs the use of the Schottky
Barrier principle with a Platinum barrier metal.
Features
• Dual Diode Construction; Terminals 1 and 3 May Be Connected for
Parallel Operation at Full Rating
• 45 V Blocking Voltage
• Low Forward Voltage Drop
• Guard−ring for Stress Protection and High dv/dt Capability (> 10 V/ns)
• 175°C Operating Junction Temperature
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant*
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 4.3 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
MAXIMUM RATINGS
Rating
Symbol
Max
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
45
V
V_RWM
V_R
Average Rectified Forward Current
I_F(AV)
A
(Rated V_R, T_C = 125°C)
Per Diode
30
Per Device
60
Peak Repetitive Forward Current,
I_FRM
60
A
(Rated V_R, Square Wave,
20 kHz, T_C = 90°C)
Per Diode
Non−Repetitive Peak Surge Current
I_FSM
500
A
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
Peak Repetitive Reverse Current
(2.0 ms, 1.0 kHz)
I_RRM
2.0
A
Storage Temperature Range
T_stg −65 to +175 °C
Operating Junction Temperature (Note 1)
T_J
−65 to +175 °C
Peak Surge Junction Temperature
(Forward Current Applied)
T_J(pk)
175
°C
Voltage Rate of Change
dv/dt
10,000
V/ms
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. The heat generated must be less than the thermal conductivity from
Junction−to−Ambient: dP_D/dT_J < 1/R_qJA.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
60 AMPERES, 45 VOLTS
1
2, 4
3
1
2
3
TO−247
CASE 340AL
MARKING DIAGRAM
MBR6045WT
AYWWG
A
= Assembly Location
Y
= Year
WW = Work Week
G
= Pb−Free Package
ORDERING INFORMATION
Device
MBR6045WTG
Package
TO−247
(Pb−Free)
Shipping
30 Units/Rail
© Semiconductor Components Industries, LLC, 2014
1
July, 2014 − Rev. 10
Publication Order Number:
MBR6045WT/D