MBR4015LWTG Datasheet, PDF (1/5 Pages) ON Semiconductor – Switch Mode Schottky Power Rectifier

MBR4015LWTG
Switch Mode
Schottky Power Rectifier
TO247 Power Package
This device employs the Schottky Barrier principle in a large area
metal−to−silicon power rectifier. Features epitaxial construction with
oxide passivation and metal overlay contact. Ideally suited for low
voltage, high frequency switching power supplies; free wheeling
diodes and polarity protection diodes.
Features
• Highly Stable Oxide Passivated Junction
• Guardring for Overvoltage Protection
• Low Forward Voltage Drop
• Dual Diode Construction; Terminals 1 and 3 May Be Connected for
Parallel Operation at Full Rating.
• Full Electrical Isolation without Additional Hardware
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant*
Mechanical Characteristics
• Case: Molded Epoxy
• Epoxy Meets UL 94 V−0 @ 0.125 in
• Weight: 4.3 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
15
V
V_RWM
V_R
Average Rectified Forward Current
I_O
(At Rated V_R, T_C = 120°C)
Per Leg
Per Package
A
20
40
Peak Repetitive Forward Current,
I_FRM
40
A
(At Rated V_R, Square Wave,
20 kHz, T_C = 95°C)
Per Leg
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load
I_FSM
120
A
Conditions Halfwave, Single Phase,
60 Hz) Per Package
Storage/Operating Case Temperature
T_stg, T_C −55 to +150 °C
Operating Junction Temperature (Note 1)
T_J −55 to +150 °C
Voltage Rate of Change,
dv/dt
10,000 V/ms
(Rated V_R, T_J = 25°C)
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2014
1
July, 2014 − Rev. 10
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
40 AMPERES, 15 VOLTS
1
2
3
1
2
3
TO−247
CASE 340AL
MARKING DIAGRAM
MBR4015LWT
AYWWG
MBR4015LWT
A
Y
WW
G
= Specific Device Code
= Assembly Location
= Year
= Work Week
= Pb−Free Package
ORDERING INFORMATION
Device
Package
Shipping
MBR4015LWTG TO−247
(Pb−Free)
30 Units / Rail
Publication Order Number:
MBR4015LWT/D