MBR4015LWT Datasheet, PDF (1/5 Pages) Motorola, Inc – SWITCHMODE™ Power Rectifier

MBR4015LWT
SWITCHMODEt
Schottky Power Rectifier
TO247 Power Package
This device employs the Schottky Barrier principle in a large area
metal−to−silicon power rectifier. Features epitaxial construction with
oxide passivation and metal overlay contact. Ideally suited for low
voltage, high frequency switching power supplies; free wheeling
diodes and polarity protection diodes.
Features
• Highly Stable Oxide Passivated Junction
• Guardring for Overvoltage Protection
• Low Forward Voltage Drop
• Dual Diode Construction; Terminals 1 and 3 May Be Connected for
Parallel Operation at Full Rating.
• Full Electrical Isolation without Additional Hardware
• Pb−Free Package is Available*
Mechanical Characteristics
• Case: Molded Epoxy
• Epoxy Meets UL 94 V−0 @ 0.125 in
• Weight: 4.3 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
15
V
V_RWM
V_R
Average Rectified Forward Current
I_O
(At Rated V_R, T_C = 120°C)
Per Leg
Per Package
A
20
40
Peak Repetitive Forward Current,
I_FRM
40
A
(At Rated V_R, Square Wave,
20 kHz, T_C = 95°C)
Per Leg
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load
I_FSM
120
A
Conditions Halfwave, Single Phase,
60 Hz) Per Package
Storage/Operating Case Temperature
T_stg, T_C −55 to +150 °C
Operating Junction Temperature (Note 1)
T_J −55 to +150 °C
Voltage Rate of Change,
dv/dt
10,000 V/ms
(Rated V_R, T_J = 25°C)
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
40 AMPERES, 15 VOLTS
1
2
3
1
2
3
TO−247
CASE 340L
STYLE 2
MARKING DIAGRAM
MBR4015LWT
AYWWG
MBR4015LWT
A
Y
WW
G
= Specific Device Code
= Assembly Location
= Year
= Work Week
= Pb−Free Package
ORDERING INFORMATION
Device
MBR4015LWT
Package
TO−247
Shipping
30 Units / Rail
MBR4015LWTG TO−247
(Pb−Free)
30 Units / Rail
© Semiconductor Components Industries, LLC, 2010
1
March, 2010 − Rev. 9
Publication Order Number:
MBR4015LWT/D