English
Language : 

MBR3045ST_14 Datasheet, PDF (1/5 Pages) ON Semiconductor – Switch‐mode Power Rectifier
MBR3045ST,
MBRB3045CT-1
Switch‐mode
Power Rectifier
Features and Benefits
• Dual Diode Construction − Terminals 1 and 3 May Be Connected for
Parallel Operation at Full Rating
• 45 V Blocking Voltage
• Low Forward Voltage Drop
• 175°C Operating Junction Temperature
• These are Pb-Free Devices
Applications
• Power Supply − Output Rectification
• Power Management
• Instrumentation
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight (Approximately): 1.9 Grams (TO−220)
1.5 Grams (TO−262)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Epoxy Meets UL 94 V−0 @ 0.125 in
MAXIMUM RATINGS
Rating
Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
45
V
VRWM
VR
Average Rectified Current
(TC = 130°C)
Per Device IF(AV)
30
A
Per Diode
15
Peak Repetitive Forward Current, per Diode
IFRM
30
A
(Square Wave, VR = 45 V, 20 kHz)
Non-Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions,
Halfwave, Single Phase, 60 Hz)
IFSM
150
A
Peak Repetitive Reverse Current, per Diode
IRRM
2.0
A
(2.0 ms, 1.0 kHz)
Storage Temperature Range
Tstg
−65 to °C
+175
Operating Junction Temperature (Note 1)
TJ
−65 to °C
+175
Peak Surge Junction Temperature
(Forward Current Applied)
TJ(pk)
175
°C
Voltage Rate of Change (Rated VR)
dv/dt 10,000 V/ms
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. The heat generated must be less than the thermal conductivity from
Junction-to-Ambient: dPD/dTJ < 1/RqJA.
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
30 AMPERES
45 VOLTS
3
1
4
2, 4
MARKING
DIAGRAMS
1
2
3
4
TO−220
CASE 221A
STYLE 6
AYWW
B3045G
AKA
I2PAK (TO−262)
CASE 418D
STYLE 3
AYWW
B3045CTG
AKA
1 23
A
Y
WW
AKA
G
= Assembly Location
= Year
= Work Week
= Polarity Designator
= Pb−Free Device
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 3 of this data sheet.
© Semiconductor Components Industries, LLC, 2014
1
September, 2014 − Rev. 9
Publication Order Number:
MBR3045ST/D