MBR3045PT Datasheet, PDF (1/4 Pages) ON Semiconductor – SWITCHMODE Power Rectifier

MBR3045PT
Preferred Device
SWITCHMODEt
Power Rectifier
These state−of−the−art devices use the Schottky Barrier principle
with a platinum barrier metal.
Features
• Dual Diode Construction; Terminals 1 and 3 may be Connected for
Parallel Operation at Full Rating
• Guard−ring for Stress Protection
• Low Forward Voltage
• 175°C Operating Junction Temperature
• Pb−Free Package is Available*
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 4.3 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
MAXIMUM RATINGS
Rating
Symbol
Max
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
45
V
V_RWM
V_R
Average Rectified Forward Current
I_F(AV)
A
(Rated V_R, T_C = 105°C)
Per Device
30
Per Diode
15
Peak Repetitive Forward Current,
(Rated V_R, Square Wave,
20 kHz) Per Diode
I_FRM
30
A
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
I_FSM
200
A
Peak Repetitive Reverse Current (2.0 ms, I_RRM
2.0
A
1.0 kHz) Per Diode (See Figure 6)
Storage Temperature Range
Operating Junction Temperature (Note 1)
Peak Surge Junction Temperature
(Forward Current Applied)
T_stg
T_J
T_J(pk)
−65 to +175 °C
−65 to +175 °C
175
°C
Voltage Rate of Change (Rated V_R)
dv/dt
10,000 V/ms
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
1. The heat generated must be less than the thermal conductivity from
Junction−to−Ambient: dP_D/dT_J < 1/R_qJA.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
1
February, 2006 − Rev. 3
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
30 AMPERES, 45 VOLTS
1
2
3
4
MARKING
DIAGRAM
4
1
2
3
SOT−93
CASE 340D
PLASTIC
AYWWG
MBR3045PT
A
= Assembly Location
Y
= Year
WW = Work Week
G
= Pb−Free Package
ORDERING INFORMATION
Device
Package
Shipping
MBR3045PT
SOT−93 30 Units / Rail
MBR3045PTG
SOT−93
(Pb−Free)
30 Units / Rail
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
MBR3045PT/D