MBR150 Datasheet, PDF (1/5 Pages) Motorola, Inc – Axial Lead Rectifiers

MBR150, MBR160
MBR160 is a Preferred Device
Axial Lead Rectifiers
The MBR150/160 series employs the Schottky Barrier principle in a
large area metal−to−silicon power diode. State−of−the−art geometry
features epitaxial construction with oxide passivation and metal
overlap contact. Ideally suited for use as rectifiers in low−voltage,
high−frequency inverters, free wheeling diodes, and polarity
protection diodes.
Features
• Low Reverse Current
• Low Stored Charge, Majority Carrier Conduction
• Low Power Loss/High Efficiency
• Highly Stable Oxide Passivated Junction
• These are Pb−Free Devices*
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 0.4 Gram (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Polarity: Cathode Indicated by Polarity Band
MAXIMUM RATINGS
Rating
Symbol Value Unit
Peak Repetitive Reverse Voltage
V_RRM
V
MBR150
50
MBR160
60
Working Peak Reverse Voltage
DC Blocking Voltage
V_RWM
V_R
RMS Reverse Voltage
MBR150 V_R(RMS)
35
V
MBR160
42
Average Rectified Forward Current (Note 1)
I_O
(V_R(equiv) v 0.2 V_R(dc), T_L = 90°C,
R_qJA = 80°C/W, P.C. Board Mounting, T_A = 55°C)
1.0
A
Nonrepetitive Peak Surge Current
(Surge applied at rated load conditions,
halfwave, single phase, 60 Hz, T_L = 70°C)
I_FSM
25
A
(for one
cycle)
Operating and Storage Junction Temperature
Range (Reverse Voltage Applied)
T_J, T_stg − 65 to °C
+150
THERMAL CHARACTERISTICS (Notes 1 and 2)
Characteristic
Symbol Max Unit
Thermal Resistance, Junction−to−Ambient
R_qJA
80 °C/W
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Lead Temperature reference is cathode lead 1/32″ from case.
2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
1
June, 2006 − Rev. 8
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIERS
1.0 AMPERE − 50 AND 60 VOLTS
DO−41
AXIAL LEAD
CASE 59
STYLE 1
MARKING DIAGRAM
A
MBR1x0
YYWW G
G
A
= Assembly Location
MBR1x0 = Device Code
x = 5 or 6
Y
= Year
WW
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 4 of this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
MBR150/D