LV8761V Datasheet, PDF (1/13 Pages) Sanyo Semicon Device – Bi-CMOS LSI Forward/Reverse H-bridge Driver

Ordering number : ENA1172A
LV8761V
Bi-CMOS LSI
Forward/Reverse H-bridge Driver
http://onsemi.com
Overview
The LV8761V is an H-bridge driver that can control four operation modes (forward, reverse, brake, and standby) of a
motor. The low on-resistance, zero standby current, highly efficnet IC is optimal for use in driving brushed DC motors
for office equipment.
Features
• Forward/reverse H-bridge motor driver: 1 channel
• Built-in current limiter circuit
• Built-in thermal protection circuit
• Built-in short-circuit protection function
• Unusual condition warning output pin
• Short-circuit protection circuit selectable from latch-type or auto reset-type
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Supply voltage
Output peak current
Output continuous current
Logic input voltage
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VM max
VCC max
IO peak
IO max
VIN
Pd max
Topr
Tstg
Conditions
tw ≤ 20ms, duty 5%
Mounted on a specified board. *
* Specified circuit board : 90mm×90mm×1.6mm, glass epoxy 2-layer board (2S0P), with backside mounting.
Ratings
Unit
38
V
6
V
4
A
3
A
-0.3 to VCC+0.3
V
3.15
W
-20 to +85
°C
-55 to +150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Semiconductor Components Industries, LLC, 2013
May, 2013
30310 SY 20100223-S00008 / 42308 MS PC 20080331-S00003 No.A1172-1/13