LV8713T Datasheet, PDF (1/16 Pages) Sanyo Semicon Device – PWM Constant-Current Control Stepping Motor Driver

Ordering number : ENA1918
LV8713T
Bi-CMOS LSI
PWM Constant-Current Control
Stepping Motor Driver
http://onsemi.com
Overview
The LV8713T is a stepping motor driver of the micro-step drive corresponding to supports 8W 1-2 phase excitation. It
is the best for the drive of the stepping motor for a scanner and a small printer.
Features
• Single-channel PWM constant-current control stepping motor driver incorporated.
• Control mode can be set to 2-phase, 1-2 phase, 4W1-2 phase , or 8W1-2 phase
• Microstep can control easily by the CLK-IN input.
• Power-supply voltage of motor : VM max = 18V
• Output current
: IO max = 0.8A
• Output ON resistance
: RON = 1.1Ω (upper and lower total, typical, Ta = 25°C )
• A thermal shutdown circuit and a low voltage detecting circuit are built into.
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Motor supply voltage
Logic supply voltage
Output peak current
Output continuousness current
Logic input voltage
Allowable power dissipation
Symbol
VM max
VCC max
IO peak
IO max
VIN
Pd max
Conditions
Each 1ch, tw ≤ 10ms, duty 20%
Each 1ch
*
Operating temperature
Topr
Storage temperature
Tstg
* Specified circuit board : 57.0mm×57.0mm×1.7mm, glass epoxy 2-layer board.
Ratings
Unit
18
V
6
V
1.0
A
800
mA
-0.3 to VCC + 0.3
V
1.35
W
-20 to +85
°C
-55 to +150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Semiconductor Components Industries, LLC, 2013
June, 2013
20211 SY 20110117-S00002 No.A1918-1/16