English
Language : 

LV8417CSGEVB Datasheet, PDF (1/5 Pages) –
Ordering number : ENA1996
LV8417CS
Bi-CMOS IC
Forward/Reverse Motor Driver
http://onsemi.com
Overview
The LV8417CS is a 1-channel H bridge motor driver IC. The package size is extremely small with wafer level package
(WLP). Moreover, the on-resistance is low (upper and lower total 0.27Ω typ.).
The application voltage range is wide (2.0V to 10.5V).
The H bridge of this IC is P-N composition and thereby reduces the external parts without need of charge pump.
Therefore, LV8417CS realizes reduction of mounting area which enables lower cost and smaller application size.
Functions
• H-bridge 1-channel forward/reverse motor driver
• IO max=1.0A (t≤100ms 2.0A, t≤10ms 3.8A)
• BiCDMOS process
• Built-in low voltage reset and thermal shutdown circuit
• Output ON resistance (Upper and lower total 0.27Ω; Ts=25°C, IO=1.0A)
Specifications
Maximum Ratings at Ta = 25°C, SGND = PGND = 0V
Parameter
Symbol
Conditions
Ratings
Unit
Power supply voltage (for load)
Power supply voltage (for control)
Output current
Output peak current
Input voltage
Allowable power dissipation
VM max
VCC max
IO max
IO peak1
IO peak2
VIN max
Pd max
t ≤ 100ms
t ≤ 10ms
Mounted on a specified board *
-0.5 to 12.6
V
-0.5 to 6.0
V
1.0
A
2.0
A
3.8
A
-0.5 to VCC+0.5
V
850 mW
Operating temperature
Topr
-20 to +85
°C
Storage temperature
Tstg
-55 to +150
°C
* Specified board : 57mm × 57mm × 1.6mm, glass epoxy both side board.
Caution 1) Absolute maximum ratings represent the value which cannot be exceeded for any length of time.
Caution 2) Even when the device is used within the range of absolute maximum ratings, as a result of continuous usage under high temperature, high current,
high voltage, or drastic temperature change, the reliability of the IC may be degraded. Please contact us for the further details.
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Semiconductor Components Industries, LLC, 2013
May, 2013
D0711 SY 20111012-S00003 No.A1996-1/5