LV8415XA Datasheet, PDF (1/13 Pages) ON Semiconductor – Blurring correction driver

Ordering number : ENA2245
LV8415XA
Bi-CMOS IC
Blurring correction driver
H bridge × 2-channel driver
http://onsemi.com
Overview
LV8415XA is dual channel H-bridge driver IC for digital still camera.
Function
• Actuator driver (saturation drive H bridge) × 2-channel
• Hall Amplifier × 2-channel
• Constant current hall bias circuit × 2-channel
• General-purpose amplifier × 2-channel
• With built-in for PWM signal generation logic circuit × 2-channel
• 8-bit DAC for hall bias × 2-channel
• 8-bit DAC for hall amplifier offset adjustment × 2-channel
• Three line serial input
• Two systems in power supply (VM: for actuator, VCC)
• With built-in thermal protection circuit
• With built-in low voltage malfunction prevention circuit
WLP32L
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Supply voltage 1
Supply voltage 2
Output peak current
Output current
Hall bias current
Allowable power dissipation
VM max
VCC max
IO peak
IO max
IHB max
Pd max
OUT1 to 2 (t ≤ 10msec, duty ≤ 20%)
OUT1 to 2
On a specified board *
Operating temperature
Topr
Storage temperature
Tstg
* Specified board: 40.0mm×50.0mm×0.8mm, Four layers fiberglass epoxy circuit board.
* 2 Tjmax=150°C Please design PCB so that internal chip temperature does not exceed 150 °C.
Ratings
Unit
6
V
6
V
600
mA
350
mA
5
mA
1
W
-20 to +85
°C
-55 to +150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Allowable Operating Ratings at Ta = 25°C
Parameter
Supply voltage range 1
Supply voltage range 2
Logic input voltage
Symbol
VM
VCC
VIN
Conditions
Ratings
Unit
2.7 to 5.5
V
2.7 to 5.5
V
0 to VCC+0.3
V
ORDERING INFORMATION
See detailed ordering and shipping information on page 13 of this data sheet.
Semiconductor Components Industries, LLC, 2014
January, 2014
10814NK 20131114-S00002 No.A2245-1/13