LV8413GP Datasheet, PDF (1/7 Pages) Sanyo Semicon Device – Bi-CMOS LSI For DSC, and Cell Phone Camera Modules H-Bridge × 2-channel Motor Driver

Ordering number : ENA1341B
LV8413GP
Bi-CMOS LSI
For DSC, and Cell Phone Camera Modules
H-Bridge × 2-channel Motor Driver
http://onsemi.com
Overview
The LV8413GP is an H-bridge × 2-channel motor driver IC and is able to control 4 modes of forward, reverse, brake,
and standby.
This IC housed in a miniature package is optimum for use in a stepping motor driving system for DSC or a camera
module of cell phones.
Features
• Saturation drive H-bridge : 2-channels
• Built-in thermal protection circuit
• Built-in low voltage malfunction prevention circuit
• Incorporates a transistor for driving photosensors
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Power supply voltage 1
VM max
Power supply voltage 2
Output peak current
Output continuous current 1
Output continuous current 2
Allowable power dissipation
VCC max
IO peak
IO max1
IO max2
Pd max
Outs 1 to 4, t ≤ 10msec, ON-duty ≤ 20%
Outs 1 to 4
PI
Mounted on a circuit board*
Operating temperature
Topr
Storage temperature
Tstg
* Specified circuit board : 50.0mm × 40.0mm × 0.8mm : glass epoxy four-layer board (2S2P)
Ratings
Unit
6
V
6
V
600
mA
400
mA
15
mA
0.7
W
-30 to +85
°C
-55 to +150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Semiconductor Components Industries, LLC, 2013
June, 2013
62712 SY 20120613-S00001/51111 SY/N1908 MS PC 20081016-S00007 No.A1341-1/7