LV8411GR Datasheet, PDF (1/7 Pages) Sanyo Semicon Device – Bi-CMOS LSI For DSC, and Cell Phone Camera Modules 4-channel Single-chip Motor Driver IC

Ordering number : ENA1250A
LV8411GR
Bi-CMOS LSI
For DSC, and Cell Phone Camera Modules
4-channel Single-chip Motor Driver IC
http://onsemi.com
Overview
The LV8411GR is an H bridge motor driver IC and is able to control 4 modes of forward, reverse, brake, and standby.
This IC housed in a miniature package is optimum for use in a stepping motor driving system for DSC or a camera
module of cell phones.
Features
• Saturation drive H bridge: 4 channels
• Built-in thermal protection circuit
• Built-in low voltage malfunction prevention circuit
• Incorporates a transistor for driving photosensors
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
Power supply voltage 1
Power supply voltage 2
Output peak current
Output continuous current 1
Output continuous current 2
Allowable power dissipation
VM max
VCC max
IO peak
IO max1
IO max2
Pd max
Channels 1 to 4, t ≤ 10msec, ON-duty ≤ 20%
Channels 1 to 4
PI1
Mounted on a circuit board*
6.0
V
6.0
V
600
mA
400
mA
30
mA
1.05
W
Operating temperature
Topr
-40 to +85
°C
Storage temperature
Tstg
-55 to +150
°C
* Specified circuit board : 40mm×50mm×0.8mm : glass epoxy four-layer board
Caution 1) Absolute maximum ratings represent the value which cannot be exceeded for any length of time.
Caution 2) Even when the device is used within the range of absolute maximum ratings, as a result of continuous usage under high temperature, high current,
high voltage, or drastic temperature change, the reliability of the IC may be degraded. Please contact us for the further details.
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Semiconductor Components Industries, LLC, 2013
June, 2013
62012 SY 20120604-S00001/70908 MS PC 20080703-S00001 No.A1250-1/7