LV8063FA-BH Datasheet, PDF (1/8 Pages) ON Semiconductor – Single-Phase Full-Wave Driver

Ordering number : ENA2062
LV8063FA
Bi-CMOS IC
Fan Motor Driver
Single-Phase Full-Wave Driver
http://onsemi.com
Overview
The LV8063FA is the driver IC with BTL linear output for single-phase fan motor, and that drives at high efficiency,
low power, and low noise by suppressing the reactive power.
The BTL output can be combined with the PWM control by an external signal, which is optimum for the note PC, the
CPU cooler, etc. that requires low power dissipation and low noise.
Functions
• Single-phase full-wave operating by BTL output (BTL amplifier gain : +43dB)
• Speed control available by PWM pin
• Hall bias output pin (VHB = 1.05V typ)
• Built-in Quick Start circuit
• FG(rotation signal) output pin (Open drain output)
• Built-in thermal-shutdown (TSD) circuit
• Built-in lock protection and automatic return circuit
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
Maximum supply voltage
OUT pin output current
OUT pin output voltage handling
FG output voltage handling
FG output current
HB output current
Allowable power dissipation
VCC max
IOUT max1
IOUT max2
VOUT max
VFG max
IFG max
IHB max
Pd max1
In regular mode
In lock-detection mode
Independent IC
7
V
0.7
A
1
A
7
V
7
V
5
mA
10
mA
0.2
W
Pd max2
IC on board *
0.4
W
Operating temperature
Topr
-30 to +95
°C
Storage temperature
Tstg
-55 to +150
°C
* Specified substrate : 20mm × 10mm × 0.8mm, Paper phenol
Caution 1) Absolute maximum ratings represent the value which cannot be exceeded for any length of time.
Caution 2) Even when the device is used within the range of absolute maximum ratings, as a result of continuous usage under high temperature, high current,
high voltage, or drastic temperature change, the reliability of the IC may be degraded. Please contact us for the further details.
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Semiconductor Components Industries, LLC, 2013
May, 2013
52312 SY 20120516-S00002 No.A2062-1/8