LV8013T Datasheet, PDF (1/6 Pages) Sanyo Semicon Device – Forward/Reverse Motor Driver

Ordering number: ENA0907B
LV8013T
Bi-CMOS IC
Forward/Reverse Motor Driver
http://onsemi.com
Overview
LV8013T is a 1ch forward/reverse motor driver IC using D-MOS FET for output stage. As MOS circuit is used, it
supports the PWM input. Its features are that the on resistance (0.3Ω typ) and current dissipation are low.
It also provides protection functions such as heat protection circuit and reduced voltage detection and is optimal for the
motors that need high-current.
Functions
• 1ch forward/reverse motor driver
• Possible to respond to 3V control voltage and 6V motor voltage device
• Low power consumption
• Low ON resistance 0.5Ω
• Built-in charge pump circuit
• Built-in low voltage reset and thermal shutdown circuit
• Four mode function forward/reverse, brake, stop.
Specifications
Maximum Ratings at Ta = 25°C, SGND = PGND = 0V
Parameter
Supply voltage (For load)
Symbol
VM max
Conditions
Ratings
Unit
-0.5 to 16
V
Supply voltage (For control)
Output current
Input voltage
Allowable power dissipation
VCC max
IO max
IO peak1
IO peak2
VIN max
Pd max
DC
t ≤ 100ms, f = 5Hz
t ≤ 10ms, f = 5Hz
Mounted on a specified board *
-0.5 to 6.0
V
1.2
A
2.0
A
3.8
A
-0.5 to VCC+0.5
V
800 mW
Operating temperature
Topr
-20 to +75
°C
Storage temperature
Tstg
-55 to +150
°C
*Specified board: 30mm × 50mm × 1.6mm, glass epoxy board.
Caution 1) Absolute maximum ratings represent the value which cannot be exceeded for any length of time.
Caution 2) Even when the device is used within the range of absolute maximum ratings, as a result of continuous usage under high temperature, high current,
high voltage, or drastic temperature change, the reliability of the IC may be degraded. Please contact us for the further details.
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Semiconductor Components Industries, LLC, 2013
May, 2013
71812 SY/N2608 MS / 80107 MS PC B8-9208 No.A0907-1/6