LV5710GP Datasheet, PDF (1/7 Pages) Sanyo Semicon Device – For camera sensor Power supply for charge pump

Ordering number : ENA1899A
LV5710GP
Bi-CMOS LSI
Power Supply for Charge Pump
for Camera Sensor
http://onsemi.com
Overview
The LV5710GP is power supply for charge pump for camera sensor.
Functions
 Regulating the 5V input by boosting it three-fold with the charge pump
to the specified voltage.
 Output voltage variable with external resistor.
 Soft start function incorporated, which reduces the rush current at start
of charge pump.
 Timer-latch type short-circuit protective function incorporated.
VCT20 3x3, 0.5P
Specifications
Absolute Maximum Ratings at Ta = 25C
Parameter
Maximum supply voltage
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VDD max
Pd max
Topr
Tstg
Conditions
with specified substrate *
* : Specified substrate : 114.3mm76.1mm1.6mm, glass epoxy board
Ratings
Unit
6.0
V
0.55
W
20 to +80
C
40 to +125
C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed,
damage may occur and reliability may be affected.
Allowable Operating Ratings at Ta = 25C
Parameter
Supply voltage
Input “H” voltage
Input “L” voltage
Symbol
VDD
VINH
VINL
EN pin
EN pin
Conditions
Ratings
Unit
min
typ
max
4.5
5.5
V
1.5
VDD
V
0.1
0.4
V
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended
Operating Ranges limits may affect device reliability.
ORDERING INFORMATION
See detailed ordering and shipping information on page 7 of this data sheet.
Semiconductor Components Industries, LLC, 2014
August, 2014
80614HK/D0810SY 20101125-S00002 No.A1899-1/7