LV5696P Datasheet, PDF (1/15 Pages) Sanyo Semicon Device – For Car Audio Systems Multi-Power Supply IC

Ordering number : ENA2159A
LV5696P
Bi-CMOS IC
System Power Supply IC
for Automotive Infotainment
Multiple Output Linear
Voltage Regulator
http://onsemi.com
Overview
The LV5696P is a multiple output linear regulator IC, which allows reduction of quiescent current. The LV5696P is
specifically designed to address automotive infotainment systems power supply requirements. The LV5696P integrates
6 linear regulator outputs, a high side power switch, over current protection, overvoltage protection and thermal
shutdown circuitry.
Function
• Low current consumption : typ 50μA
• 6 system of regulators
VDD (Micon) : VOUT 3.3/5.0V, IOUT MAX 200mA
CD
: VOUT 8.0V, IOUT MAX 1000mA
Illumination : VOUT 3.0V to 8.0V (Adjustable external resistors),
IOUT MAX 200mA
Audio
: VOUT 8.5V, IOUT MAX 300mA
SYS
: VOUT 5.0V, IOUT MAX 500mA
DSP
: VOUT 3.3V, IOUT MAX 800mA
• 1 high-side switch coupled VCC
ANT
: IOUT MAX 200mA, VCC-VOUT = 0.5V
• Over current protection
• Over voltage protection typ 21V (All outputs except for VDD are turned off)
• Thermal shut down circuit typ 175°C
• Applied P-LDMOS to output stage
HZIP15J
(Warning) The protector functions only improve the IC’s tolerance and they do not guarantee the safety of the IC if used under the
conditions out of safety range or ratings. Use of the IC such as use under overcurrent protection range, thermal shutdown state may
degrade the IC’s reliability and eventually damage the IC.
ORDERING INFORMATION
See detailed ordering and shipping information on page 15 of this data sheet.
Semiconductor Components Industries, LLC, 2014
March, 2014
32414NK/D1212NKPC 20121105-S00005 No.A2159-1/15