LV5695P_14 Datasheet, PDF (1/14 Pages) ON Semiconductor – System Power Supply IC for Automotive Infotainment Multiple Output Linear Voltage Regulator

Ordering number : ENA1972B
LV5695P
Bi-CMOS IC
System Power Supply IC
for Automotive Infotainment
Multiple Output Linear
Voltage Regulator
http://onsemi.com
Overview
The LV5695P is a multiple output linear regulator IC, which allows reduction of quiescent current. The LV5695P is
specifically designed to address automotive infotainment systems power supply requirements. The LV5695P integrates
5 linear regulator outputs, 2 high side power switches, over current protection, overvoltage protection and thermal
shutdown circuitry.
Function
• Quiescent current 50μA (Typ. when only VDD is in operation)
• Five channel regulator
For VDD: VOUT is 5.0V/3.3V(Operation always),
IOmax is 300mA
For SWD5V: VOUT is 5.0V, IOmax is 500mA
For CD: VOUT is 8.0V, IOmax is 2000mA
For illumination: VOUT is 8.5V, IOmax is 500mA
For audio systems: VOUT is 8.45V, IOmax is 800mA
• Two high side switch:
AMP: Voltage difference between input and output is 0.5V,
IOmax is 500mA
ANT: Voltage difference between input and output is 0.5V,
IOmax is 350mA
• Over current protector
• Overvoltage protector (Without VDD-OUT) Clamp voltage is 28V (typical)
• Thermal Shut down 175ºC (typical)
• Pch-LDMOS is used for power output block.
HZIP15J
(Warning) The protector functions only improve the IC’s tolerance and they do not guarantee the safety of the IC if used under the
conditions out of safety range or ratings. Use of the IC such as use under over current protection range or thermal shutdown state may
degrade the IC’s reliability and eventually damage the IC.
ORDERING INFORMATION
See detailed ordering and shipping information on page 14 of this data sheet.
Semiconductor Components Industries, LLC, 2014
March, 2014
32414NK/O2611SY 20111018-S00003/82411SY 20110718-S00006 No.A1972-1/14