LV56831P Datasheet, PDF (1/9 Pages) Sanyo Semicon Device – For Car Audio Systems Multi Voltage Regulator IC

Ordering number : ENA1983B
LV56831P
Monolithic Linear IC
Multi Voltage Regulator IC
for Car Audio Systems
http://onsemi.com
Overview
The LV56831P has 4 system regulator, VDD 5V(3.3V), AUDIO(8.5V), AMP remote(12V) and REG(3.3V/5V select).
About protection circuits, it has Over-current-protection, Over-voltage-protection and Thermal-shut-down. AMP
remote and REG supply is independent terminal from VCC.,
Features
• 4 system regulator
VDD(LCD micon) : VOUT 5.0V(3.3V), IO max 300mA, reverse current prevention.
Audio
: VOUT 8.5V, IO max 400mA
AMP remote
: VOUT 12V, IO max 500mA
REG3.3/5V
: VOUT 3.3V(5V), IO max 500mA
• Over-current-protection
• Over-voltage-protection: Typ 21V(except VDD)
• Thermal-shut-down Typ 175ºC
• Applied Pch-LDMOS for output stages.
(Warning)The protector functions only improve the IC’s tolerance and they do not guarantee the safety of the IC if used under the conditions out of
safety range or ratings. Use of the IC such as use under overcurrent protection range or thermal shut down state may degrade the IC’s reliability and
eventually damage the IC.
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Conditions
Conditions
Supply voltage
Allowable Power dissipation
VCC max
Pd max
(*Ta ≤ 25°C)
IC unit
With Al heatsink(50×50×1.5mm³)
Infinite heat rediation
Peak supply voltage
Operating ambient temperature
VCC peak
Topr
See below pulse wave.
Storage temperature
Tstg
Junction temperature
Tj max
Ratings
Unit
36
V
1.3
W
5.3
W
26
W
50
V
-40 to +85
°C
-55 to +150
°C
150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Semiconductor Components Industries, LLC, 2013
August, 2013
52312 SY/30712 SY/O2611 SY 20111014-S00007 No.A1983-1/9