LV5232VH Datasheet, PDF (1/9 Pages) Sanyo Semicon Device – 16ch LED Driver

Ordering number : ENA1628D
LV5232VH
Bi-CMOS IC
16ch LED Driver
http://onsemi.com
Overview
The LV5232VH is a semiconductor integrated circuit that incorporates a serial input and serial or parallel output
16-stage shift register that features a CMOS structure based on Bi-CMOS process technology. The LV5232VH also
contains an n-channel CMOS construction high-withstand-voltage, large-current drive 16-stage parallel output driver.
The protection circuit of the output malfunction is built into.
Function
• Serial input and serial or parallel output
• Enable input for output control
• Serial output enables cascade connection
• Low supply current (30μA typ. during standby ICC≤40μA)
• Serial input/output levels compatible with typical CMOS devices
• High-withstand-voltage LED driver with open drain output
High withstand voltage (VDS < 42V)
High-current drive (IO max = 100mA)
• Operating temperature range Ta = -25 to 75°C
• Output malfunction protection circuit
Reset input pin , VCC decrease voltage confirmation
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
Maximum supply voltage
Output voltage
Output current
Allowable power dissipation
VCC max
VO max
IO max
Pd max
SVCC
LEDO1 to LEDO16 off
Ta ≤ 25°C *
6
V
42
V
100
mA
1100
mW
Operating temperature
Topr
-25 to +75
°C
Storage temperature
Tstg
-40 to +125
°C
* Specified board : 114.3mm × 76.1mm × 1.6mm, glass epoxy board.
Caution 1) Absolute maximum ratings represent the values which cannot be exceeded for any length of time.
Caution 2) Even when the device is used within the range of absolute maximum ratings, as a result of continuous usage under high temperature, high current,
high voltage, or drastic temperature change, the reliability of the IC may be degraded. Please contact us for the further details.
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Recommended Operating Conditions at Ta = 25°C
Parameter
Recommended supply voltage
Operating supply voltage range
Output applied voltage
Output current
Symbol
VCC
VCC op
VO
IO
SVCC
SVCC
Conditions
Duty = 45% to 55%
Ratings
Unit
5.0
V
3.0 to 5.5
V
42
V
100 mA
ORDERING INFORMATION
See detailed ordering and shipping information on page 9 of this data sheet.
Semiconductor Components Industries, LLC, 2013
September, 2013
90413NK 20130821-S00001/52913NK 20130514-S00002 No.A1628-1/9