LV5213LP Datasheet, PDF (1/10 Pages) Sanyo Semicon Device – 3ch LED Driver

Ordering number : ENA0183A
LV5213LP
Bi-CMOS LSI
3ch LED Driver
http://onsemi.com
Overview
This LV5213LP is LED driver for cell phones. Each LED driver gets a constant current controlled. The brilliance
control becomes possible by changing the current value that flows to LED by the serial bus control.
LV5213LP can achieve various effects of the illumination of a full-color LED display.
Functions
• Three color LED driver circuits.
• The LED current can be switched independently in 5-bit units (0 to 5mA).
• Independent on/off control of the three LED drivers (independent control of the 3 RGB colors).
• Each LED drive current level can be adjusted independently over the serial bus.
• Miniature package.
• Thermal shutdown circuit.
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Supply voltage 1
Supply voltage 2
Allowable power dissipation
VCC max
VDD max
Pd max
Mounted on the specified board *
Maximum input current
Maximum output current
STBY pin voltage
Operating temperature
VINB
IO max
VSTBY
Topr
Storage temperature
Tstg
The specified board *: 50mm × 40mm × 0.8mm glass epoxy (4-layer circuit board).
Ratings
Unit
6.0
V
6.0
V
5.5
W
6.0
V
12.0
mA
6.0
V
-30 to +75
°C
-40 to +125
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Semiconductor Components Industries, LLC, 2013
August, 2013
O0610 SY/D1405 MS OT 20051201-S00002 No.A0183-1/10