LM393_16 Datasheet, PDF (1/10 Pages) ON Semiconductor – Low Offset Voltage Dual Comparators

LM393, LM393E, LM293,
LM2903, LM2903E, LM2903V,
NCV2903
Low Offset Voltage
Dual Comparators
The LM393 series are dual independent precision voltage
comparators capable of single or split supply operation. These devices
are designed to permit a common mode range−to−ground level with
single supply operation. Input offset voltage specifications as low as
2.0 mV make this device an excellent selection for many applications
in consumer, automotive, and industrial electronics.
Features
• Wide Single−Supply Range: 2.0 Vdc to 36 Vdc
• Split−Supply Range: ±1.0 Vdc to ±18 Vdc
• Very Low Current Drain Independent of Supply Voltage: 0.4 mA
• Low Input Bias Current: 25 nA
• Low Input Offset Current: 5.0 nA
• Low Input Offset Voltage: 5.0 mV (max) LM293/393
• Input Common Mode Range to Ground Level
• Differential Input Voltage Range Equal to Power Supply Voltage
• Output Voltage Compatible with DTL, ECL, TTL, MOS, and CMOS
Logic Levels
• ESD Clamps on the Inputs Increase the Ruggedness of the Device
without Affecting Performance
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
V_CC
+ Input
- Input
Output
R2
2.1 k
Q4
R4
Q3
Q5
Q6
Q14
2.0 k
F1
www.onsemi.com
8
1
8
1
8
1
PDIP−8
N SUFFIX
CASE 626
SOIC−8
D SUFFIX
CASE 751
Micro8E
DM SUFFIX
CASE 846A
PIN CONNECTIONS
Output A 1
2_−
Inputs A ₃ +
GND ⁴
8 _VCC
7 _{Output B}
−⁶
+₅
Inputs B
(Top View)
DEVICE MARKING AND ORDERING
INFORMATION
See detailed marking information and ordering and shipping
information on pages 6 and 7 of this data sheet.
Q10
Q1
Q9
Q8
Q2
Q11
R1
4.6 k
Q16
Q12
Q15
Figure 1. Representative Schematic Diagram
(Diagram shown is for 1 comparator)
© Semiconductor Components Industries, LLC, 2016
1
October, 2016 − Rev. 31
Publication Order Number:
LM393/D