LC717A00AJ Datasheet, PDF (1/11 Pages) Sanyo Semicon Device – Capacitance-Digital-Converter LSI for Electrostatic Capacitive Touch Sensors

Ordering number : ENA2089A
LC717A00AJ
CMOS LSI
Capacitance-Digital-Converter LSI
for Electrostatic Capacitive Touch
Sensors
http://onsemi.com
Overview
The LC717A00AJ is a high-performance, low-cost capacitance-digital-converter LSI for electrostatic capacitive touch
sensor, especially focused on usability. It has 8 channels capacitance-sensor input. The built-in logic circuit can detect
the state (ON/OFF) of each input and output the result. This makes it ideal for various switch applications.
The calibration function is automatically performed by the built-in logic circuit during power activation or whenever
there are environmental changes. In addition, since initial settings of parameters, such as gain, are configured,
LC717A00AJ can operate as stand-alone when the recommended switch pattern is applied.
Also, since LC717A00AJ has a serial interface compatible with I²C and SPI bus, parameters can be adjusted using
external devices whenever necessary. Moreover, outputs of the 8-input capacitance data can be detected and measured
as 8-bit data.
Features
• Detection system: Differential capacitance detection (Mutual capacitance type)
• Input capacitance resolution: Can detect capacitance changes in the femto Farad order
• Measurement interval (8 differential inputs): 18ms (Typ) (at initial configuration),
3ms (Typ) (at minimum interval configuration)
• External components for measurement: Not required
• Current consumption: 320μA (Typ) (VDD = 2.8V), 740μA (Typ) (VDD = 5.5V)
• Supply voltage: 2.6V to 5.5V
• Detection operations: Switch
• Packages: SSOP30
• Interface: I²C * compatible bus or SPI selectable.
* I²C Bus is a trademark of Philips Corporation.
Semiconductor Components Industries, LLC, 2013
August, 2013 Ver1.0.1
D1912HKPC 20121129-S00003/71112HK No.A2089-1/11