LB1930MC-AH Datasheet, PDF (1/5 Pages) ON Semiconductor – Low-Voltage, Low-Saturation Bidirectional Motor Driver

Ordering number : ENA2018A
LB1930MC
Monolithic Digital IC
Low-Voltage, Low-Saturation
Bidirectional Motor Driver
http://onsemi.com
Overview
The LB1930MC is single-channel forward/reverse DC brush motor driver. This device is optimal for CD, DVD and
Blue Ray Disk player loading motors. And it is possible to use it for others as a general-purpose product.
Features
• The low saturation voltage reduces IC internal heating and allows a high voltage to be applied to the motor. Thus this
device can be used even in environments with a high operating ambient temperature.
Output saturation voltage: Vsat1 = 0.25V typical (IO = 0.2A)
(High side + low side):
Vsat2 = 0.55V typical (IO = 0.5A)
Operating temperature range: Ta = -30 to +85°C
• The LB1930MC features the wide operating voltage range of 2.2 to 10.8V and the low standby current drain of 0.1μA,
and therefore can easily be used in battery operated systems.
• To minimize through currents, the LB1930MC internal logic passes through an internal standby state when switched
by the input signals between forward/reverse and brake, or between forward and reverse.
• There are no constraints on the relationship between the input voltage and the supply voltage. For example, the
LB1930MC can be used with VCC = 3V, and VIN = 5V.
• If the IC chip exceeds 180°C due to an output short causing a large current flow, the built-in thermal protection circuit
suppresses the drive current to prevent fires or destruction of the IC.
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
Supply voltage
Output current
Output voltage handling
Applied input voltage
Allowable power dissipation
VCC max
IOUT max
VOUT max
IH max
Pd max
Mounted on a specified board *
11
V
1000
mA
VCC + VSF
V
10.5
V
750
mW
Operating temperature
Topr
-30 to +85
°C
Storage temperature
Tstg
-55 to +150
°C
* Specified board: 114.3mm × 76.1mm × 1.6mm, glass epoxy board.
Caution 1) Absolute maximum ratings represent the value which cannot be exceeded for any length of time.
Caution 2) Even when the device is used within the range of absolute maximum ratings, as a result of continuous usage under high temperature, high current,
high voltage, or drastic temperature change, the reliability of the IC may be degraded. Please contact us for the further details.
.
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Semiconductor Components Industries, LLC, 2013
May, 2013
41812 SY/32112 SY 20120228-S00004 No.A2018-1/5