LA73076V Datasheet, PDF (1/7 Pages) Sanyo Semicon Device – Monolithic Linear IC Video Driver for DVC/DSC, Cell Phone

Ordering number : ENA0911
LA73076V
Monolithic Linear IC
Video Driver for DVC/DSC,
Cell Phone
http://onsemi.com
Overview
The LA73076V is a low voltage drive (2.7V to 3.6V) video driver developed for portable appliances including digital
video cameras, digital still cameras and cell phones. It incorporates a minus-voltage generator that allows the
LA73076V to generate its output with the pedestal voltage set to 0V, so that no output coupling capacitor is required.
This enables substantial reduction in mounting space without concerned about V-sag.
Features
• Output coupling capacity not required
• Low-voltage drive (VCC = 2.7V to 3.6V)
• Νο V-sag
• Sextic LPF incorporated (fc = 10MHz)
• 6dB amplifier
• Current drain of 0μA in the standby mode
• Output drive capable of covering maximum 75Ω output, one channel
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Allowable power dissipation
Symbol
VCC max
Pd max
Conditions
Ta ≤ 80°C, *Mounted on a specified board
Operating temperature
Topr
Storage temperature
Tstg
*: Mounted on a specified board: 114.3mm×76.1mm×1.6mm, glass epoxy
Ratings
Unit
4.0
V
220
mW
-20 to +80
°C
-55 to +150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Semiconductor Components Industries, LLC, 2013
July, 2013
90507 TI IM B8-8590 No.A0911-1/7