LA6324N Datasheet, PDF (1/5 Pages) Sanyo Semicon Device – High-Performance Quad Operational Amplifier

Ordering number : ENN2704C
LA6324N
Monolithic Linear IC
High-Performance
Quad Operational Amplifier
http://onsemi.com
Overview
The LA6324 consists of four independent, high-performance, internally phase compensated operational amplifiers that
are designed to operate from a single power supply over a wide range of voltages. These four operational amplifiers are
packaged in a single package. As in case of conventional general-purpose operational amplifiers, operation from dual
power supplies is also possible and the power dissipation is low. It can be applied to various uses in commercial and
industrial equipment including all types of transducer amplifiers and DC amplifiers.
Features
• No phase compensation required
• Wide operating voltage range:
3.0 V to 30.0 V (single supply)
±1.5 V to ±15.0 V (dual supplies)
• Highly resistant to dielectric breakdown
• Input voltag range includes the neighborhood of GND level and output voltage range VOUT is from 0 to VCC –1.5 V.
• Small current dissipation:
ICC = 0.6 mA typ/VCC = + 5 V, RL = ∞
Specitications
Absolute Maximum Ratings at Ta = 25 °C
Parameter
Maximum Supply voltage
Differential input voltage
Maximum input voltage
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VCC max
VID
VIN max
Pd max
Topr
Tstg
LA6324N
Conditions
Ratings
Unit
32
V
32
V
-0.3 to +32
V
720
mW
-30 to +85
°C
-55 to +125
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Semiconductor Components Industries, LLC, 2013
August, 2013
92706 / O2504TN(PC)/63096HA(II)/4138TA(KOTO) No.2704-1/5